Vtech CS6649 CS6649_2 Quick Start Guide - Page 1
Vtech CS6649 Manual
View all Vtech CS6649 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick start guide CS6648-2/CS6649/ CS6649-2/CS6649-3 Introduction This quick start guide provides you with the basic installation and setup instructions. A limited set of features are described in abbreviated form. For complete installation and operation instructions, refer to the Abridged user's manual provided in the product package, or see the online Complete user's manual at www.vtechphones.com. Telephone base and handset charger installation Install the telephone base and handset charger as shown below. Telephone wall jack A DSL filter (not included) is required if you have DSL high-speed Internet service. The DSL filter must be plugged into the telephone wall jack. Telephone line cord Electrical outlet not controlled by a wall switch Telephone base power adapter Charger adapter Telephone base Handset charger Use only the power adapters and batteries supplied with this product. Battery installation and charging Install the battery as shown below. Once you have installed the battery, you may be able to make and receive short calls. For best performance, charge the handset battery continuously for at least 10 hours. 1. Plug the battery connector securely into the socket. 2. Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment. 3. Slide the battery compartment cover towards the center of the handset until it clicks into place. 4. Place the handset in the handset charger to charge. CHARGE light remains on when charging. Enter the menu 1. Press MENU. 2. Press or until the screen displays the desired feature menu. 3. Press SELECT to enter that menu. • To return to the previous menu, press CANCEL. • To return to idle mode, press and hold CANCEL. Set date and time 1. Press MENU. 2. Scroll to Set date/time, then press SELECT. 3. Use the dialing keys (0-9) to enter the month (MM), date (DD) and year (YY), then press SELECT. 4. Use the dialing keys (0-9) to enter the hour (HH) and minute (MM). Then press or to choose AM or PM. 5. Press SELECT to save. Set number of rings You can set the answering system to answer an incoming call after 2, 3, 4, 5 or 6 rings; or toll saver. If you choose toll saver, the answering system answers a call after 2 rings when you have new messages, or after 4 rings when you have no new messages. 1. Press MENU. 2. Scroll to Answering sys then press SELECT. 3. Scroll to Ans sys setup then press SELECT. 4. Scroll to # of rings then press SELECT. 5. Press or to choose 6, 5, 4, 3, 2 or Toll saver and then press SELECT. Record your own announcement You can use the preset announcement to answer calls, or replace it with your own recorded announcement. The announcement can be up to 90 seconds in length. 1. Press MENU. 2. Scroll to Answering sys then press SELECT twice. 3. The system announces, "To play, press 2. To record, press 7." Then press 7 to record. 4. The system announces, "Record after the tone. Press 5 when you are done." After the tone, speak towards the microphone. 5. Press 5 when done. IMPORTANT! Refer to the online Complete user's manual for a full set of installation and operation instructions. For manual download or customer service, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. Copyright © 2012 for VTECH TELECOMMUNICATIONS LTD. All rights reserved. Printed in China. 96-008624-020-100