Vtech V.Smile TV Learning System User Manual - Page 8
Connecting To A Vcr, Connecting The Joystick, To Begin Play - smartridges
View all Vtech V.Smile TV Learning System manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
INSTRUCTIONS For TVs with a mono audio input: - Connect the yellow plug on the V.Smile™ cable to the yellow video input terminal on your TV. - Connect the white or red plug on the V.Smile™ cable to the white or red audio input terminal on your TV. CONNECTING TO A VCR If there is no video IN and audio IN terminal on your TV set, you can connect V.Smile™ to a VCR. - Connect the yellow plug on the V.Smile™ cable to the yellow video input terminal on your VCR. - Connect the white and red plugs on the V.Smile™ cable to the white and red audio input terminals on your VCR. CONNECTING THE JOYSTICK Plug the joystick into the PLAYER 1 joystick port located on the front panel of the main unit. TO BEGIN PLAY • Make sure the unit is turned OFF. • Insert a Smartridge™ into the Smartridge™ slot on the front of the main unit. The Smartridge™ should lock into place. Please use care when removing the Smartridge™ from the slot. • Turn on the TV. • Set your TV input mode to accept input from the port to which V.Smile™ is connected. In many cases this will involve setting the TV to "video" mode; however, since all TVs vary, please refer to your TV or VCR manual for further details. • Turn the V.Smile™ TV Learning System on by pressing the ON Button. 7