Vtech t2426 User Manual - Page 4

GETTING STARTED INSTALLATION Before You Install 1 Choose a location for the Base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch. Plug the AC power adaptor into the electrical outlet and the DC connector to the jack on the bottom of the Base Unit. 2 Install the Handset battery pack. Use only Battery Pack provided or recommended by VTech. a)R e m ove b a t t e r y compartment cover by pressing on the indentation and sliding downward. b)Align the two holes in the plug with the socket pins, then snap the plug into place. c)Place the battery pack in the compartment with the wires in one of the lower corners, as shown in the illustration. d)Replace cover by sliding it up into place. 3 Attach the Belt Clip to the cordless Handset (optional). To attach To remove NOTE: Install the Base Unit away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. 4