Vtech vt1962 User Manual - Page 13

GETTING STARTED Setting Up Your VT 1962 Choose an area near an electrical outlet and a telephone wall jack. AC Power Adapter Plug the AC power adaptor into an electrical outlet and the DC connector to the back of the Base Unit. Setting the Tone/Pulse Switch The TONE/PULSE switch is located on the bottom of the Base Unit and is factory set to TONE. If you have touch tone service, do not change the switch setting. If you have rotary (Pulse) service, set the switch to PULSE. TELEPHONE WALL JACK AC OUTLET TONE PULSE Tone/Pulse Selector CAUTION: Use only CLASS 2 9V DC POWER SUPPLY included with your phone. Handset Ringer The Handset ringer is programmed ON as the factory default setting. Refer to PROGRAMMING THE RINGER on page 22 for more information. Charge the Handset battery pack before use. The battery pack recharges automatically whenever the Handset is in the Base Unit. The batteries must be charged for 16 hours before using your phone for the first time. Charge the Handset Battery Pack for 16 hours before using CHARGI MA DELETE REPEAT 13