Weber Genesis 1300 LP Owner Manual - Page 31
Unlatch the Spider Stopper Guards and remove.
View all Weber Genesis 1300 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
d) Unlatch the Spider Stopper Guards and remove. Figure 14. g) Lift and twist the burner assembly slightly, to separate the crossover tube from the burners. Figure 17. Remove the burners from the cooking box. Crossover tube Figure 14 e) Remove the manifold bracket and unscrew the two wing nuts that hold the manifold to the cooking box. Pull the manifold and valve assembly out of the burners and carefully set it down. Figure 15. View from behind cooking box Wing nuts Figure 15 f) Slide the burner assembly out from under the guide screw and washer in the corners of the cooking box. Figure 16. Guide screw Figure 17 h) To reinstall the burners, reverse steps c) through g). ƽCAUTION: The burner openings must be positioned properly over the valve orifices. Figure 18a. Check proper assembly before fastening manifold in place. Figure 18b. (a) Valve Burner (b) Figure 16 Figure 18 31