Weber Genesis Gold C NG Owner Manual - Page 19

Lighting the Side Burner

Page 19 highlights

Lighting the Side Burner The side burner has a separate ignition system from the main cooking box. Lighting the side burner if the main burners are lit. 1) Open the side burner lid. 2) Push down and turn the side burner control to HI. 3) Press the side burner igniter button several times so it clicks each time. ƽ DANGER Failure to open the lid while igniting the side burner, or not waiting 5 minutes to allow the gas to clear if the side burner does not light, may result in an explosive flame-up which can cause serious bodily injury or death. 1 2 Lighting only the side burner. 1) Open the side burner lid. 2) Check that the fuel gauge reads more than "E". 3) Check that the side burner valve is turned OFF. (Push each knob down and turn clockwise to ensure they are in the off position.), and all main burner control valves are OFF (push down and turn clockwise). 4) Turn the LP tank valve on (turn clockwise). 5) Push down and turn the side burner control valve to HI. 6) Push the side burner igniter button several times so it clicks each time. 1 5 3 ƽ CAUTION: Side burner flame may be difficult to see on a bright sunny day. ƽ WARNING: If the side burner does not light: 1) Turn OFF the side burner control valve. 2) Wait 5 minutes to let the gas clear before you try again or try to light with a match. 3 6 ƽ CAUTION: Side burner flame may be difficult to see on a bright sunny day. ƽ WARNING: If the side burner does not light: 1) Turn OFF the side burner control valve. 2) Wait 5 minutes to let the gas clear before you try again or try to light with a match. D-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

D-3
Lighting the Side Burner
The side burner has a separate ignition system from
the main cooking box.
±
DANGER
Failure to open the lid while igniting the side
burner, or not waiting 5 minutes to allow the
gas to clear if the side burner does not light,
may result in an explosive flame-up which
can cause serious bodily injury or death.
Lighting only the side burner.
1)
Open the side burner lid.
2)
Check that the fuel gauge reads more than “E”.
3)
Check that the side burner valve is turned OFF.
(Push each knob down and turn clockwise to
ensure they are in the off position.), and all main
burner control valves are OFF (push down and
turn clockwise).
4)
Turn the LP tank valve on (turn clockwise).
5)
Push down and turn the side burner control valve
to HI.
6)
Push the side burner igniter button several times
so it clicks each time.
±
CAUTION: Side burner flame may be difficult to
see on a bright sunny day.
±
WARNING: If the side burner does not light:
1)
Turn OFF the side burner control valve.
2)
Wait 5 minutes to let the gas clear before
you try again or try to light with a match.
Lighting the side burner if the main burners are lit.
1)
Open the side burner lid.
2)
Push down and turn the side burner control to HI.
3)
Press the side burner igniter button several times so
it clicks each time.
±
CAUTION: Side burner flame may be difficult to
see on a bright sunny day.
±
WARNING: If the side burner does not light:
1)
Turn OFF the side burner control valve.
2)
Wait 5 minutes to let the gas clear before
you try again or try to light with a match.
6
3
5
1
3
2
1