Weber Spirit 500 LX Owner Manual - Page 29
Unlatch the Spider Stopper Guards and remove.
View all Weber Spirit 500 LX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
d) Unlatch the Spider Stopper Guards and remove. Figure 14. g) Lift and twist the burner assembly slightly, to separate the crossover tube from the burners. Figure 17. Remove the burners from the cooking box. Crossover tube Figure 14 e) Remove the manifold bracket and unscrew the two wing nuts that hold the manifold to the cooking box. Pull the manifold and valve assembly out of the burners and carefully set it down. Figure 15. View from behind cooking box Figure 17 h) To reinstall the burners, reverse steps c) through g). ƽCAUTION: The burner openings must be positioned properly over the valve orifices. Figure 18a. Check proper assembly before fastening manifold in place. Figure 18b. (a) Valve Figure 15 Wing nuts f) Slide the burner assembly out from under the guide screw and washer in the corners of the cooking box. Figure 16. Guide screw Burner (b) Figure 16 Figure 18 29