Weber Summit Gold D LP Owner Manual - Page 38
Side Burner Lighting Instructions
View all Weber Summit Gold D LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Operating Instructions Side Burner Lighting Instructions ƽ DANGER Failure to open the lid while igniting the side burner, or not waiting 5 minutes to allow the gas to clear if the side burner does not light, may result in an explosive flame-up which can cause serious bodily injury or death. Lighting the side burner if the main burners are lit. 1) Open the side burner lid. 2) Push down and turn the side burner control to START/ HI. 3) Push igniter button and hold until burner ignites.You will hear the igniter sparking 1 Lighting only the side burner. 1) Open the side burner lid. 2) Check that the side burner valve is turned OFF. (Push each knob down and turn clockwise to ensure they are in the off position.), and all main burner control valves are OFF (push down and turn clockwise). 3) Turn the LP tank valve on (turn counter-lockwise). 4) Push down and turn the side burner control valve to START/HI. 5) Push igniter button and hold until burner ignites. You will hear the igniter sparking. ƽ CAUTION: Side burner flame may be difficult to see on a bright sunny day. 1 2 ƽ CAUTION: Side burner flame may be difficult to see on a bright sunny day. ƽ WARNING: If the side burner does not light: 1) Turn OFF the side burner control valve. 2) Wait 5 minutes to let the gas clear before you try again or try to light with a match. 2, 4 ƽ WARNING: If the side burner does not light: 1) Turn OFF the side burner control valve. 2) Wait 5 minutes to let the gas clear before you try again or try to light with a match. D-5