Weber Summit S-470 NG Owner Manual - Page 30

30 SIDE BURNER TROUBLESHOOTING SIDE BURNER MAINTENANCE ƽ WARNING: All gas controls and supply valves should be in the "OFF" position. Make sure black wire is connected between the igniter and electrode. Make sure white wire is connected between the igniter and grounding clip. Spark should be a white/blue color, not yellow. 1) Igniter Wire 2) Ground wire 3) Burner Side Burner Grate Side Burner cap Side Burner Ring & Head Igniter Electrode Control Knob Igniter PROBLEM Rotisserie burner does not light. ROTISSERIE TROUBLESHOOTING CHECK CURE Did you hold the burner control knob in and hold in for 20 seconds until after burner ignited? Try to relight burner by holding burner control knob in and continue holding in until 20 seconds after burner has ignited. Did you wait to see the entire ceramic surface When relighting burner by holding burner control knob in, wait to see the entire become alight before counting 20 seconds? ceramic surface become alight before counting 20 seconds? Did you repeatedly use the snap ignition until the burner ignited? After waiting five minutes for gas to clear, try repeatedly using the snap igniter until the burner ignites (refer to "Lighting the Rotisserie Burner"). Does the igniter work (Do you see a spark when you repeatedly use the snap igniter? Try manually lighting the burner (refer to "Lighting the Rotisserie Burner"). Call customer service. If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®. WWW.WEBER.COM®