Weider 110 User Manual - Page 6

3. Attach the Frame (2) to the Crossbar (3) with two 3 M8 x 55mm Bolts (18) and two M8 Nylon Locknuts (17). Do not tighten the Locknuts yet. Be sure that the Frame is attached on the indicated side of the Crossbar. 18 3 2 17 4. Tap a 30mm Square Inner Cap (22) into each end 4 of the Leg Lever (4). Press a 25mm Round Inner Cap (24) into the indicated end of the weight tube on the Leg Lever (4). Press the 25mm Round Angled Cap (20) onto the other end of the weight tube. 4 22 20 24 22 Weight Tube 5. Lubricate the M10 x 60mm Bolt (32) with grease. Attach the Leg Lever (4) to the bracket on the Front Leg (8) with the Bolt and an M10 Nylon Locknut (33). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. 5 32 Lubricate 4 33 8 6. Insert the two Pad Tubes (10) into the holes in the 6 Leg Lever (4). Slide two Long Foam Pads (23) onto each Pad Tube. Press two 19mm Round 23 4 Inner Caps (9) into each Pad Tube. 9 10 9 23 6 9 10 9 23