Weider 130 English Manual - Page 6
indicated.
View all Weider 130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3. Be sure that the "H"-Frame (1) is oriented as shown. The high side of the weight rests must 3 be on the side indicated. Attach the Frame (2) to the "H"-Frame (1) with two M8 x 56mm Bolts (15) and two M8 Nylon Locknuts (19). i High Side of Weight Rests 19 . .. . 2 • . 15 - 1 • 4. Tap a 38mm Square Inner Cap (22) into the indicated end of the Leg Lever (4). Tap a 1" Round Inner Cap (24) into the indicated end of the weight tube. Tap the,1" Angled Round Cap (20) onto the other end of the weight tube. Slide the Weight Stop (26) onto the weight tube. 5. Lubricate the M10 x 56mm Bolt (14). Attach the Leg Lever (4) to the Frame (2) with the Bolt and the tvilu Nyioti Lockt-lut (18). 4 4 22 -. 26 o 20 o (1)- 24 Weight Tube ."' 22 5 (t..----1- 4-Lubricate -,. 4 0 -, 2 "-18 0 6. Tap two 3/4" Round Inner Caps (9) into each Pad Tube (10). Insert the Pad Tubes through the holes 6 in the Leg Lever (4). Slide two Foam Pads (23) onto each Pad Tube. 23 0 9 4 10 9 . 23 6