Weider 146 Bench Canadian English Manual - Page 6

Assembly Before beginning assembly, carefully read the following information and instructions: Make Things Easier for Yourself! Everything in this manual is designed to ensure that the weight bench can be assembled successfully by anyone. However, it is important to recognize that the weight bench has many small parts and that the assembly process will take time. Most people find that by setting aside plenty of time, and by deciding to make the task enjoyable, assembly will go smoothly. • Assembly requires two people. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • Tighten all parts as you assemble them, unless instructed to do otherwise. • For help identifying the small parts, use the PART IDENTIFICATION CHART on page 5. • As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. The following tools (not included) are required for assembly: • Two (2) adjustable wrenches • One (1) rubber mallet • One (1) standard screwdriver • One (1) phillips screwdriver • Lubricant, such as grease or petroleum jelly plus soapy water. Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. Before assembling this product, make sure you have read and understand the information in the 1 box above. Attach the Crossbar (3) to the Right Upright (1) with two M10 x 70mm Bolts (26), a Support Plate (40), and two M10 Nylon Locknuts (21). Make sure that the Left Upright is turned as shown. Do not tighten the Nylon Locknuts yet. 26 40 Attach the Crossbar (3) to the Left Upright (16) in the same manner. 1 16 21 3 2. Attach the Front Leg (8) to the Frame (2) with three M8 x 16mm Screws (23) and three M8 Washers (20). Do not tighten the Screws yet. 2 23 20 23 2 20 A 23 8 40 26 6