Weider 2980 X Canadian English Manual - Page 9
Arm Assembly
View all Weider 2980 X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Orient the Top Frame (4) with the welded support on the bottom. 6 Attach the Top Frame (4) to the Upright (3) with two M8 x 65mm Bolts (68), two M8 Washers (59), and two M8 Nylon Locknuts (58). Do not tighten the Nylon Locknuts yet. Attach the Top Frame (4) between the Weight Guides (21) with an M10 x 155mm Bolt (74), two M10 Washers (57), two 19mm Spacers (76), and an M10 Nylon Locknut (56). See steps 2-4, and 6. Tighten the M8 Nylon Locknuts (58). 59 4 68 59 76 76 56 57 57 74 Welded Support 58 58 3 21 21 Arm Assembly 7. Grease an M10 x 77mm Bolt (79). Orient the Leg Lever (8) with the welded support on the side shown. Attach the Leg Lever to the Front Leg (7) with the Bolt and an M10 Nylon Locknut (56). Do not overtighten the Nylon Locknut; the Leg Lever must pivot easily. 7 56 8 Welded Support 7 Grease 79 8. Grease an M10 x 77mm Bolt (79). Attach the Pivot Frame (5) to the Top Frame (4) with the Bolt and an M10 Nylon Locknut (56). Do not overtighten the Nylon Locknut; the Pivot Frame must pivot easily. Attach the two Arm Pins (40) to the Pivot Frame (5) with two M4 x 20mm Self-tapping Screws (69). Insert the Arm Pins into the two holes in the Upright (3). 8 56 69 5 40 9 4 Holes 79 3 Grease 69 40