Weider 8520 User Manual - Page 9
Attach a Bumper 73 to the Rocker Arm 32 - assembly
View all Weider 8520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
11. Press a 1 3/4" Square Inner Cap (44) into the 11 Seat Frame (36). Attach a Bumper (73) to the Seat Frame with a 1/2" Tap Screw (65). Slide the Seat Frame (36) onto the 5/16" x 2 1/2" Carriage Bolts (1) in the Base (4). See the inset drawing. The bracket on the Seat Frame must be behind the Press Frame (17). Hand-tighten a 5/16" Nylon Locknut (3) 42 onto each Carriage Bolt. Do not tighten the Nylon Locknuts until the end of this assembly step. 3 Attach the Seat Frame (36) to the Front Upright (42) with two 5/16" x 2 3/4" Bolts (11), 8 two 5/16" Flat Washers (8), and two 5/16" Nylon Locknuts (3). 11 Tighten all Nylon Locknuts used in this step now. Bracket 36 17 44 73 36 65 3 ARM ASSEMBLY 12. Attach a Bumper (73) to the Rocker Arm (32) with a 1/2" Tap Screw (65). 12 Lubricate a 3/8" x 3 1/4" Bolt (35). Attach the Rocker arm (32) to the Base (4) with the 3/8" x 3 1/4" Bolt and a 3/8" Nylon Locknut (21). 4 1 73 65 32 21 13. Lubricate a 3/8" x 2 1/2" Bolt (7). Attach the Leg Lever (29) to the Rocker Arm (32) with the 3/8" x 2 1/2" Bolt and a 3/8" Nylon Jam Nut (33). Press a 1 3/4" Square Inner Cap (44) into each end of the Leg Lever (29). 4 Lubricate-35 13 44 32 7-Lubricate 33 29 44 9