Weider 8630 Training Canadian English Manual - Page 10
IMPORTANT NOTE: Before assembling
View all Weider 8630 Training manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
15. Attach a Press Arm (7) to one side of the Press 15 Frame (12) with two M8 x 63mm Bolts (39) and two M8 Nylon Locknuts (40). Attach the other Press Arm (7) to the Press Frame (12) in the same manner. 39 7 16. Lubricate both axles on the Butterfly Frame (3). 16 Identify the Right Fly Arm (5) and the Left Fly Arm (6). Slide the Left Fly Arm (6) onto the indicated axle. Note: Do not to confuse the Left Fly Arm with the Right Fly Arm (5). Make sure that the upper end of the Left Fly Arm is behind the indicated bracket on the Butterfly Frame (3). IMPORTANT NOTE: Before assembling the 25mm Retainers (45) used in this step, make sure that you thoroughly understand the step. The Retainers can be assembled only once. If they must be removed, you will need to order new Retainers. Tap two 25mm Retainers (45) and a 25mm Round Outer Cap (46) onto the axle. Make sure that the teeth on the Retainers bend toward the Round Outer Cap, as shown in the inset drawing. Attach the Right Fly Arm (5) in the same manner. 40 7 12 3 Lubricate Axle 5 Bracket 45 46 6 Axle 45 46 10