Weider Body Works 5000 English Manual - Page 5
Storing The Weight Training System
View all Weider Body Works 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ADJUSTING THE RESISTANCE To increase the resistance of the weight training system, pull a Bungee Cord (35) and insert it into the Bungee Bracket (10). For more resistance, insert additional Bungee Cords into the Bungee Bracket. ADJUSTING THE INCLINE To change the resistance of the weight training system, you can adjust the incline. To adjust the incline, first lift the Top Frame (1) and pull the Long Knob (58). Slide the Adjustment Bracket (48) to the desired position, and release the Long Knob into one of the adjustment holes in the Adjustment Leg (5). Make sure that the Long Knob is engaged in an adjustment hole. 10 35 1 48 Adjustment Holes 5 58 STORING THE WEIGHT TRAINING SYSTEM To store the weight training system, first remove the four L-Pins (17). Next, detach the Handlebar (29) and the Foot Plate (8). Then, pull the Short Knob (44), slide the Bottom Frame into the Top Frame as far as possible, and release the Short Knob. To use the weight training system, pull the Short Knob (44), extend the Bottom Frame (2) as far as possible, and then release the Short Knob. Make sure that the Short Knob is engaged in a hole in the Top Frame (1). 8 17 2 44 17 29 1 17 5