Weider Cts 2000 Club Series English Manual

Weider Cts 2000 Club Series Manual

Get Weider Cts 2000 Club Series PDF manuals and user guides View all Weider Cts 2000 Club Series manuals
Add to My Manuals
Save this manual to your list of manuals

Weider Cts 2000 Club Series manual content summary:

  • Weider Cts 2000 Club Series | English Manual - Page 1
    (ININCLUB SERIES MULTI.5TAt10N HOME GYM SYSTEM 70393 MODEL'NO. 70393 number In tub space above for refgrebce, 0 • 0 • SERIAL NUMBER DECAL APPROXIMATE WEIGHT: 286 LBS. APPROXIMATE SET UP DIMENSIONS: 59"L X 47°W X 76'H W nide(' OWNER'S MANUAL a • 0 0 0 0 O O 0 • 0 0 MADE IN CANADA
  • Weider Cts 2000 Club Series | English Manual - Page 2
    Read all instructions in this manual before using this equipment. 2. Use this equipment only as described in this Assembly Manual. 3. Position the Home Gym on a or persons with pre-existing health problems. Read all instructions before using. Weider assumes no responsibility for personal injury or
  • Weider Cts 2000 Club Series | English Manual - Page 3
    for choosing the WEIDER CTS 2000 CLUB SERIES. Your home gym is designed and engineered to give you many hours of weight and aerobic conditioning. This manual is provided to help you understand the simple assembly, adjustments, and use of the Home Gym. In addition to assembly instructions it also
  • Weider Cts 2000 Club Series | English Manual - Page 4
    70393 HARDWARE SCALING SHEET Scale can be used for 3/8" Hex Head Bolts, Carriage Bolts, or Round Head Screws. I I • N Pe) Scale can be used for 5/16" Hex Head Bolts, Carriage Bolts, and Round Head Screws I 4-• 1 an I 111 111 11 S el M ee•t t•i *• - to cD N NN ta Scale can be used for
  • Weider Cts 2000 Club Series | English Manual - Page 5
    OWNER CONFIRMATION* : Your completed OWNER • 1. Name of the Product (CTS 2000 CLUB SERIES) 2. Model Number of the Product WEIDER CUSTOMER ASSISTANCE at 1400-225-0653 Monday through Friday 7 a.m. to 6 p.m. CST. All parts and service inquiries should be directed to: WEIDER SPORTING GOODS, Parts Service
  • Weider Cts 2000 Club Series | English Manual - Page 6
    PAGE 9 WEIDER SPORTING GOODS FORT T DURING THE FOLLOWING ASSEMBLY STEPS, YOU WILL FIND ASSEMBLY .P0IN0RiSrEsTi-RA.SUSCAETTMIOBTNLHSEEDS,H.SFAATDECEPTDSOI:RHNYABVOEFXOOERNSLSYYUOBC.IEHRE,.NACSFOFATNSHVTISEE.NN"EITEDHNEFCSIENE.GA.ESRSSEETMIVGEBHRLTIAE. LSYOHOUAFaVWETILBHLEEBESNEE. INSTRUCTED THE
  • Weider Cts 2000 Club Series | English Manual - Page 7
    art STOPPER 83 TUBE 121 PAGE 10 WEIDER SPORTING GOODS 0 0 0 0 FRONT o C CO 51 51 RIGHT 51 50 0 51 51 L-BRACKET 7 81 53 80 WELDED PLATE 77 56 FRONT LEFT 3 81 56
  • Weider Cts 2000 Club Series | English Manual - Page 8
    11 WEIDER SPORTING GOODS U To the Welded Stopper Tube on the front of the ARM PRESS UPRIGHT (2), bolt the SUPPORT BRACE and bolting up through the Welded Stopper Tube and then into the hole in the back of the Support. Secure with a 5/16" NYLON LOCK NUT (51). 51 8 97 51 O r 55
  • Weider Cts 2000 Club Series | English Manual - Page 9
    PAGE 12 WEIDER SPORTING GOODS STEP 2 STEPPER ASSEMBLY PART NAME 50 5/16" FLAT WASHER 51 5/16" that the Pedals should be assembled to the side of the UPRIGHT (4) opposite the STRAP BRACE (5) and the series of holes in each of the PEDALS (6) should be to the inside. Using a 1" ROUND PLASTIC COVER
  • Weider Cts 2000 Club Series | English Manual - Page 10
    PAGE 13 WEIDER SPORTING GOODS Fit a 5/8" I.D. X 1 5/8" FLAIR END PLASTIC BUSHING (103) onto the 5/8" Shock Pivot Tube on the Stepper Upright. Slide a RESISTANCE CYLINDER (30) over the Shock Pivot
  • Weider Cts 2000 Club Series | English Manual - Page 11
    PAGE 14 WEIDER SPORTING GOODS Insert the bolt on the CYLINDER MOUNTING BRACKET (31) into one of the holes in the STEPPER PEDALS (6) and secure in place with a 3/8"
  • Weider Cts 2000 Club Series | English Manual - Page 12
    (114) at the outside hole positions (Note that "Weider" is cast in the top side of the Plates.) o Working with one 10 LB. WEIGHT PLATE (10) at a time, stack the eleven 10 Lb. Weight Plates onto the GUIDE RODS (9) so the Pinning Access Slot in the Weight Plates is to the front of the unit
  • Weider Cts 2000 Club Series | English Manual - Page 13
    so that the Roll Pin sits into the groove in the top Weight Plate. Press PLASTIC GUIDE BUSHINGS (114) into the Guide Rod holes in the 20 LB. WEIGHT PLATE (113) (SEE DETAIL A) and fit it onto the GUIDE RODS (9) and atop the Weight Stack. NOTE: At this time, check to make sure all Plates are
  • Weider Cts 2000 Club Series | English Manual - Page 14
    PAGE 17 WEIDER SPORTING GOODS not tighten. Next bolt down through the TOP FRAME (12) again and into the SUPPORT BRACE (8) at the front of the ARM PRESS UPRIGHT (2) with another 5/16" METAL SPACER (90) onto the Bolt and then bolt through the second Guide Rod. Fasten with a 5/16" NYLON LOCK NUT (51). (
  • Weider Cts 2000 Club Series | English Manual - Page 15
    74 1/4" X 3/4" ROUND HEAD SCREW 84 1 1/2" SQUARE PLASTIC INSERT CAP 110 5/16" THREADED PLASTIC KNOB QTY 1 4 2 2 2 4 i 1 Orient the BACKREST (13) so that "WEIDER" reads from top to bottom. Bolt through from the back side of the ARM PRESS UPRIGHT (2) and into the Backrest with 1/4" X 2 1/2" ROUND
  • Weider Cts 2000 Club Series | English Manual - Page 16
    PAGE 19 WEIDER SPORTING GOODS STEP 6 LEG EXTENSION ASSEMBLY PART NAME QTY u Cap the bottom end of the LEG EXTENSION (19) with a 1 1/2" 49 5/16" X 2" EYE-BOLT 1 SQUARE PLASTIC
  • Weider Cts 2000 Club Series | English Manual - Page 17
    sheet andposition the Decal to the front of the Cross Tube on the ARM PRESS PIVOT FRAME (24). LUBRICATE 24 N 87N 86 \ 12 2 PAGE 20 WEIDER SPORTING GOODS 23 23 87 86 125 74 47 74 O 71 24 71 71
  • Weider Cts 2000 Club Series | English Manual - Page 18
    PAGE 21 WEIDER SPORTING GOODS El Cap each end of the ARM PRESS ARMS (26) with 1 3/4" SQUARE PLASTIC INSERT CAPS (86). El Press the ARM PRESS ARMS (26)
  • Weider Cts 2000 Club Series | English Manual - Page 19
    PAGE 23 WEIDER SPORTING GOODS STEP 8 CABLE ASSEMBLIES PART NAME 33 4 1/2" PULLEY 34 3 1/2" PULLEY 50 5116" FLAT WASHER 51 5/16" NYLON LOCK NUT . 52 5/16" X 2 1/4" HEX HEAD BOLT
  • Weider Cts 2000 Club Series | English Manual - Page 20
    the LAT CABLE (32) forward between the GUIDE RODS (9), and out and around the left side to allow for assembly of the LAT CABLE (32). After assembly of the Cable, tighten this assembly. PAGE 24 WEIDER SPORTING GOODS RIGHT. 119 50 119 2 12 50 57 0 0 9 WELDED BRACKET 32 LEFT 36 60 65 12
  • Weider Cts 2000 Club Series | English Manual - Page 21
    PAGE 25 WEIDER SPORTING GOODS Sels•cti 3.1/27,0NG•"U" Ett*CIZE.O.'( 37)'0,0ei attach both Ejra6kets to the''66ck of the ARM PRESS ARMS (26) by assembling 31W
  • Weider Cts 2000 Club Series | English Manual - Page 22
    WEIDER BRACKET (39). 51 50 O- C=5 2 39 Assemble the 84" WEIGHT STACK CABLE (40) to the SELECTOR TUBE (11). First, be fits behind the Selector Tube and in front of the GUIDE RODS (9). 4 Bolt through the SELECTOR TUBE (11), CABLE (40) end, and GUIDE BRACKET (41) with a 5/16" X 1 1/2"
  • Weider Cts 2000 Club Series | English Manual - Page 23
    PAGE 27 WEIDER SPORTING GOODS 32 63 9 0 O 42 O 65 C33 O 42 9 42 3 6 O 0 H33 9 112" PULLEY (J) (34). the CABLE TRAP BRACKET (36) has been assembled only finger tight so that the WEIGHT STACK CABLE (40) may be assembled Into the Pulley at this time. Assemble the Cable Into the Pulley and
  • Weider Cts 2000 Club Series | English Manual - Page 24
    exceed mild demands while falling short of causing breathlessness.and fatigue. The proper level of exertion can be determined using the heart rate as a guide. For effective aerobic exercise, the heart rate must be maintained at a level between 70% and 85% of your maximum heart rate. This is your
  • Weider Cts 2000 Club Series | English Manual - Page 25
    EXERCISE FREQUENCY To maintain or improve your condition, you must workout 2-3 times per week following the pattern described above. A day of rest between workouts is recommended. After several months of exercise, the number of workouts can be increased to 4-5 times per week. The key to a successful
  • Weider Cts 2000 Club Series | English Manual - Page 26
    PROCEDURE If you discover a defect or malfunction during the period to which this Warranty applies, you must follow this procedure: Write to: Parts Service Weider Sporting Goods 900 West St. John Street Olney, Illinois 62450 In your letter state your full name and address; the reason why you believe
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
(ININCLUB
SERIES
MULTI.5TAt10N
HOME
GYM
SYSTEM
70393
MODEL'
NO.
70393
number
In
tub
space
above
for
refgrebce,
0
•
0
SERIAL
NUMBER
DECAL
APPROXIMATE
WEIGHT:
286
LBS.
APPROXIMATE
SET
UP
DIMENSIONS:
59"L
X
47°W
X
76'H
W
n
ide('
OWNER'S
MANUAL
•
a
0
0
0
O
O
• 0
•
0
0
0
MADE
IN
CANADA
Congratulations
on
selecting
a
WEIDER
Fitness
Product.
You
have
just
joined
thousands
of
health
conscious
men
and
women
in
the
growing
family
of
WEIDER
customers.
We
are
committed
to
providing
excellent
service
and
customer
satisfaction.
We
invite
you
to
call
us
with
any
questions
you
may
have
concerning
this
product.
Our
customer
service
representatives
are
here
to
serve
you
and
provide
helpful
information.
Call
us
toll
-free
at
1-800-225-0653,
Monday
-Friday
7:00
AM
-
6:00
PM
CST.
Extended
Seasonal
Hours:
(Dec.
1
-
Feb.
28)
Monday
-Friday
7:00
AM
-
9:00
PM;
Saturday
9:00
AM
-
5:00;
Sunday
12:00
PM
-
4:00
PM.
Thank
you
again
for
choosing
WEIDER.
We
appreciate
having
you
as
a
customer
and
hope
this
product
will
provide
years
of
enjoyable
service.
PRINTED
IN
CANADA
WEIDER
SPORTING
GOODS,
INC.
900
West
St.
John,
Olney,
IL
62450
USA