Weider Pro 120 Bench Uk Manual
Weider Pro 120 Bench Manual
 |
View all Weider Pro 120 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Weider Pro 120 Bench manual content summary:
- Weider Pro 120 Bench | Uk Manual - Page 1
serial number in the space above for reference. Serial Number Decal (under bench) QUESTIONS? If you have questions, or if there are missing parts, Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference. USER'S MANUAL www.iconeurope.com - Weider Pro 120 Bench | Uk Manual - Page 2
Cover WARNING DECAL PLACEMENT This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size - Weider Pro 120 Bench | Uk Manual - Page 3
for persons over age 35 or persons with pre-existing health problems. 2. Read all instructions in this manual and all warnings on the weight bench before using the weight bench. Use the weight bench only as described in this manual. 3. It is the responsibility of the owner to ensure that all - Weider Pro 120 Bench | Uk Manual - Page 4
YOU BEGIN Thank you for selecting the WEIDER® PRO 120 weight bench. The weight bench offers a selection of exercises designed benefit, read this manual carefully before using the weight bench. If you have questions after reading this manual, please see the front cover of this manual. To help us - Weider Pro 120 Bench | Uk Manual - Page 5
assembly. The number in parentheses below each part refers to the key number of the part from the PART LIST near the end of this manual. IMPORTANT: If you cannot find a part in the hardware kit, check to see if it has been preassembled. M6 x 16mm Screw (5) M6 x 48mm Screw (4) M10 - Weider Pro 120 Bench | Uk Manual - Page 6
following information and instructions: • Assembly requires two persons. • Because of its weight and size, the weight bench should be assembled of the Frame (1). See the lower drawing. Press two 50mm 16 Round Outer Caps (9) onto the Adjustment Leg (3). Press the 38mm x 50mm Inner Cap (8) into - Weider Pro 120 Bench | Uk Manual - Page 7
the L-pin (15) through the indicated hole in the Pivot Leg and the corresponding hole in the Frame (1). 2 9 1 Align these holes 13 15 2 14 9 3. Press the 3/4" Round Inner Caps (7) into the ends of the Pad Tubes (10). Insert the Pad Tubes (10) into the Adjustment Leg (3). Slide the Foam Pads - Weider Pro 120 Bench | Uk Manual - Page 8
4. Attach the Bench (12) to the Frame (1) with two 4 M6 x 48mm Screws (4) and two M6 x 16mm Screws (5). 12 1 4 4 5 5. Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTMENT, beginning on page 9. 8 - Weider Pro 120 Bench | Uk Manual - Page 9
(not included). The steps below explain how the weight bench can be adjusted. Refer to the accompanying exercise guide to see the correct form for several exercises. Refer also to the exercise information accompanying your weight set for additional exercises. Make sure that all parts are properly - Weider Pro 120 Bench | Uk Manual - Page 10
9 4 50mm Round Outer Cap 10 2 Pad Tube 11 2 Lock Pin 12 1 Bench 13 1 M10 Locknut 14 1 M10 x 70mm Bolt 15 1 L-pin 16 1 38mm Square Inner Cap * - Userʼs Manual * - Exercise Guide Note: Specifications are subject to change without notice. For information about ordering - Weider Pro 120 Bench | Uk Manual - Page 11
EXPLODED DRAWING-Model No. WEEVBE7023.0 R0310A 12 16 5 9 4 13 2 1 11 4 10 6 7 7 14 15 10 9 8 7 7 6 3 9 9 11 - Weider Pro 120 Bench | Uk Manual - Page 12
information when contacting us: • the model number and serial number of the product (see the front cover of this manual) • the name of the product (see the front cover of this manual) • the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
USER'S MANUAL
Serial Number Decal
(under bench)
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
QUESTIONS?
If you have questions, or if there are
missing parts, please contact us:
Call: 08457 089 009
From Ireland: 00 (44) 53 9236102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood
West Yorkshire
WF10 5QJ
UK
Model No. WEEVBE7023.0
Serial No.
Write the serial number in the
space above for reference.
www.iconeurope.com