Weider Pro 300 English Manual - Page 6

ASSEMBLY Make Things Easier for Yourself This manual is designed to ensure that the exercise rack can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two people. • For help identifying small parts, use the PART IDENTIFICATION CHART on page 5. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the exercise rack, make sure all parts are oriented as shown in the drawings. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. The following tools (not included) are required for assembly: • Two adjustable wrenches • One rubber mallet • One standard screwdriver • One Phillips screwdriver • A small amount of soapy water. Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. Before beginning assembly, make sure you understand the information in the box above. Important: Some of the parts described in the assembly steps may be pre-assembled. Press an Endcap (11) onto each end of the two Stabilizers (5). Slide a Handgrip (12) onto the handle of each Stabilizer. 1 11 5 11 5 12 Handle 2. Attach an Upright Base (3) to a Stabilizer (5) with 2 two 3/8" x 3/4" Bolts (22) and two 3/8" Washers (18). Do not tighten the Bolts yet. Attach the other Upright Base (3) to the other Stabilizer (5) in the same manner. 3 22 5 18 22 18 12 11 11 6