Weider Pro 9835 English Manual
Weider Pro 9835 Manual
 |
View all Weider Pro 9835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Weider Pro 9835 manual content summary:
- Weider Pro 9835 | English Manual - Page 1
customer hot line will provide immediate assistance, free of charge to you. CUSTOMER HOT LINE: 1-800-999-3756 Mon.ÐFri., 6 a.m.Ð6 p.m. MST CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. USERÕS MANUAL PATENT PENDING - Weider Pro 9835 | English Manual - Page 2
You Begin 3 Assembly 4 How to Use the Home Gym System 23 Trouble-shooting and Maintenance 25 Cable Diagrams 26 Weight Resistance Chart 27 Ordering Replacement Parts Back Cover Limited Warranty Back Cover Note: A PART LIST/EXPLODED DRAWING and a PART IDENTIFICATION CHART are attached to - Weider Pro 9835 | English Manual - Page 3
this manual carefully before using the WEIDER PRO¨ 9835 Home Gym System. If you have additional questions, please call our Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled. High Pulley Station Lat Bar ASSEMBLED DIMENSIONS: Height - Weider Pro 9835 | English Manual - Page 4
each other and with the weights. This ties the different parts together and makes the equipment function as a unit Arm Assembly Completes the press and butterfly arms that you operate while you are exercising. Seat Assembly Completes the seats and backrests that support your body while you are - Weider Pro 9835 | English Manual - Page 5
you have read and understand the information in the box above. Locate and open the parts bags labeled ÒFRAME ASSEMBLY BAG ONEÓ and ÒFRAME ASSEMBLY BAG TWO.Ó Press a 2Ó Square Outer Cap (58) onto the indicated end of the Weight Base (14). Press a 2Ó Square Inner Cap (56) into the indicated end of the - Weider Pro 9835 | English Manual - Page 6
3. Press a 2Ó Square Inner Cap (56) into the end of the Top Frame (2). Press a 2Ó Square Inner Cap (56) into each side of the Butterfly Frame (3). Press two 1Ó Round Inner Caps (70) into the top of the Butterfly Frame. Insert a 5/16Ó x 3Ó Bolt (92) through the bracket on the Butterfly Frame (3) and - Weider Pro 9835 | English Manual - Page 7
) into each of the brackets on the Weight Base (14). 5 Slide a Weight Bumper (27) onto each of the Weight Guides (23). 90 Slide eight Weights (90) onto each set of Weight Guides (23). Make sure the pin grooves are on the indicated side of each stack of Weights. 90 Pin Grooves 27 23 23 14 - Weider Pro 9835 | English Manual - Page 8
the Leg Press Upright (4) with two 5/16Ó x 2 3/4Ó Bolts (55), the Support Plate (98) and two 5/16Ó Nylon Locknuts (40). Do not tighten the tighten the Nylon Locknuts yet. 51 1 40 40 4 9. Attach the upper ends of one set of Weight Guides (23) to the Top Frame (2) with a 5/16Ó x 6Ó Bolt (67), two - Weider Pro 9835 | English Manual - Page 9
Leg Press Arm (9). 56 A 56 9 56 56 Arm Assembly 11 11. Locate and open the parts bag labeled ÒARM ASSEMBLY.Ó Attach the Leg Press Bumper (53) to the Front Seat be a tight fit. Make sure the Press Frame is oriented with the upper set of holes on the side shown. Lubricate the 3/8Ó x 8Ó Bolt (52 - Weider Pro 9835 | English Manual - Page 10
Frame (12) in the same manner. 39 7 14. Press a 1Ó Round Inner Cap (70) into one of the Press Arms (7). Press a 1 3/4Ó Square Inner Cap (48) 14 into the Press Arm. on the Butterfly Frame (3). IMPORTANT NOTE: Before assembling the 1Ó Retainers (45) used in this step, make sure you thoroughly understand - Weider Pro 9835 | English Manual - Page 11
parts bag labeled ÒARM ASSEMBLYÓ will be used in assembly step 55. 6 48 22 Cable Assembly 17 17. Locate and open the parts bags labeled ÒCABLE ASSEMBLYÓ and ÒPULLEYS.Ó During steps 18 through 47, refer to the CABLE DIAGRAMS on pages 26 and 27 of this manual shortest Cable. Slide one end of the - Weider Pro 9835 | English Manual - Page 12
50 80 42 4 89 20. Locate one of the pre-assembled pairs of Pulley 20 Plates (31) and Note: The Left Arm (6) is shown removed for easier part identification. Insert a 5/16Ó x 1Ó Bolt (95) 16Ó Nylon Jam Nut (91) onto the Bolt. 89 Slide the free end of the Butterfly Cable (89) onto the 5/16Ó x - Weider Pro 9835 | English Manual - Page 13
Cable. Slide one end of the Trap is inside the Large ÒUÓ Bracket. Note: This may come pre-assembled. 24 87 Route the Rear Cable (87) through the Large ÒUÓ Weight Tube (25) until the Weight Spacer (10) touches the Weight Tube. Note: It is necessary to lift the Weight Tube (25) with the Top Weight - Weider Pro 9835 | English Manual - Page 14
27. Find the Press Cable (88)Ñthis is the longest 27 Cable. Attach the end of the Press Cable (88) to the Large ÒUÓ Bracket (84) with a 1/4Ó Nylon Locknut (44) and a 1/4Ó Washer (37). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple - Weider Pro 9835 | English Manual - Page 15
30. Route the Press Cable (88) over the indicated 3 1/2Ó 30 Pulley (82) attached to the Pulley Plates (31). The Cable must be routed from the direction shown. Refer to the inset drawing. Make sure the Cable is between the Cable Trap (80) and the Pulley. Make 88 sure the Cable Trap is positioned - Weider Pro 9835 | English Manual - Page 16
34. Route the Press Cable (88) around a 3 1/2Ó Pulley 34 (82). Attach the Pulley and a Cable Trap (80) to the Press Frame (12) with a 3/8Ó x 3Ó Bolt (94), a 3/8Ó Washer (38) and a 3/8Ó Nylon Jamnut (43). Make sure the Cable Trap (80) is turned to hold the Cable in place and that the Cable is - Weider Pro 9835 | English Manual - Page 17
38. Note: The 3 1/2Ó Pulley (82) used in this step was 38 attached in step 36. It is shown removed for easier part identification. Route the Press Cable (88) around the 3 1/2Ó Pulley (82). Make sure the Cable Trap (80) is turned to hold the Cable in place and - Weider Pro 9835 | English Manual - Page 18
(25). Thread the end of the Rear Cable (87) into the upper end of the Weight Tube (25) until the Weight Spacer (10) touches the Weight Tube. Note: It is necessary to lift the Weight Tube (25) with the Top Weight (24) slightly to thread the Rear Cable (87) in place. 85 35 68 10 - Weider Pro 9835 | English Manual - Page 19
46. Remove the indicated 3/8Ó x 2Ó Bolt (50), the 3/8Ó Nylon Locknut (42), the 3 1/2Ó Pulley (82) and the 46 Cable Trap (80) from the indicated Pulley Plates (31). Lay the Low Cable (86) over the Pulley. Re-attach the Pulley and the Cable Trap to the lowest hole in the Pulley Plates with the - Weider Pro 9835 | English Manual - Page 20
48 48. Locate and open the parts bag labeled ÒSEAT ASSEMBLY.Ó Attach a Small Backrest (97) to the Lat Upright (1) with two 1/4Ó x 2 1/2Ó Machine Screws (64) and two 1/4Ó Washers (37). 97 1 37 64 49. Press a 1 1/2Ó Square Inner Cap (57) into the Rear Seat Frame (16). 49 Insert a 1/4Ó x 2Ó Carriage - Weider Pro 9835 | English Manual - Page 21
a Large Backrest (19) to the Leg Press Upright 53 (4) with two 1/4Ó x 2 1/2Ó Machine Screws (64) and two 1/4Ó Washers (37). 4 19 64 37 54. Insert a 1/4Ó x VKR Armrest (71) to the Right VKR Arm (32) with two 1/4Ó x 2Ó Machine 57 Screws (63) and two 1/4Ó Flat Washers (37). 71 71 Attach a VKR - Weider Pro 9835 | English Manual - Page 22
this manual. Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight - Weider Pro 9835 | English Manual - Page 23
How to Use the Home Gym System The instructions below describe how each part of the home gym system can be adjusted. Refer to the exercise poster accompanying this manual to see how the home gym system should be set up for each exercise. IMPORTANT: When attaching the lat bar or handle, make sure - Weider Pro 9835 | English Manual - Page 24
set the bracket on the Rear Seat Frame (16) onto the pins on the Lat Upright (1). Attach the Rear Seat Frame to the Lat Upright with the 5/16Ó x 2 3/4Ó Carriage Bolt (77) and the Seat Knob (30). For some exercises see ATTACHING AND REMOVING THE SEAT above). Attach one end of the Chain (34) to the Low - Weider Pro 9835 | English Manual - Page 25
Trouble-shooting and Maintenance Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. The home gym system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable - Weider Pro 9835 | English Manual - Page 26
to be sure that the Cables have been assembled correctly. The starting and ending points of each Cable have been labeled. The numbers show the proper route for each Cable. IMPORTANT: If the Cables have not been correctly routed, the home gym system will not function properly and damage may occur - Weider Pro 9835 | English Manual - Page 27
PulleyÑ1 3 1ÑTop Frame Rear Cable (87) 3 2 4ÑWeight Stack Weight StackÑ5 Weight Resistance Chart This chart shows the approximate weight resistance at each station. ÒTopÓ refers to the 6.5 lbs. top weight. The other numbers refer to the 12.5 lbs. weight plates. Note: The actual resistance at - Weider Pro 9835 | English Manual - Page 28
Exploded Drawing - Model No. WESY41080 R0898A 56 57 55 20 55 91 91 40 20 87 20 42 66 43 38 38 2 42 50 50 82 56 82 85 66 80 43 40 40 69 55 92 98 56 69 55 56 67 40 50 3 70 50 82 80 82 80 82 42 50 42 40 42 71 89 91 47 70 91 47 40 89 18 48 95 45 45 46 6 37 64 55 - Weider Pro 9835 | English Manual - Page 29
Weight Guide 24 2 Top Weight 25 2 Weight Tube 26 2 Weight Tube Bumper 27 4 Weight Weight Pin 94 3 3/8Ó x 3Ó Bolt 95 3 5/16Ó x 1Ó Bolt 96 1 Handle 97 1 Small Backrest 98 1 Support Plate # 1 UserÕs Manual # 1 Exercise Poster Note: Ò#Ó indicates a non-illustrated part - Weider Pro 9835 | English Manual - Page 30
(63) 1/4" x 2" Carriage Bolt (61) 1/4" x 2 1/2" Machine Screw (64) 1/4" x 2 1/2" Carriage Bolt (60) 5/16" x 2 1/2" Carriage Bolt (49) Cable Clip (33) "V" Pulley (81) (Not shown to scale) 3 1/2" Pulley (82) (Not shown to scale) 5/16" x 2 3/4" - Weider Pro 9835 | English Manual - Page 31
1/4" Washer (37) 5/16" Washer (20) 1" Retainer (45) 5/16" x 1" Bolt (95) 3/8" Washer (38) 1/4" Nylon Locknut (44) 1/2" Plain Nut (35) 5/16" Nylon Locknut (40) 3/8" x 2" Bolt (50) 5/16" x 2 1/4" Bolt (62) 5/16" x 2 1/2" Bolt (39) 5/16" Nylon Jam Nut (91) 3/8" x 2 1/2" Bolt (65)Ð1 3/8" - Weider Pro 9835 | English Manual - Page 32
1" x 7/8" Plastic Bushing (54) 1 1/4" x 1/2Ó Spacer (10) 1" Round Inner Cap (70) 1 1/8" x 2 1/2" Plastic Bushing (47) 1/2" x 3/4" Spacer (69) 1 1/2" Square Inner Cap (57) 1" Round Outer Cap (46) 3/4" Round Inner Cap (78) 1 3/4" Square Inner Cap (48) 2" Square Outer Cap (58) 2" Square Inner - Weider Pro 9835 | English Manual - Page 33
WEIDER PRO¨ 9835 Home Gym System). 3. The SERIAL NUMBER of the product (see the front cover of this manual). 4. The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST is limited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All products
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
 |
 |
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfac-
tion through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.—Fri., 6 a.m.—6 p.m. MST
Model No. WESY41080
Serial No.
Write the serial number in the space
above for future reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number Decal (Under Seat)
USER°S
MANUAL
PATENT PENDING