Weider Pro 9835 English Manual - Page 20

Seat Assembly 48 48. Locate and open the parts bag labeled ÒSEAT ASSEMBLY.Ó Attach a Small Backrest (97) to the Lat Upright (1) with two 1/4Ó x 2 1/2Ó Machine Screws (64) and two 1/4Ó Washers (37). 97 1 37 64 49. Press a 1 1/2Ó Square Inner Cap (57) into the Rear Seat Frame (16). 49 Insert a 1/4Ó x 2Ó Carriage Bolt (61) through the center hole in a Seat Plate (41). Attach the Seat Plate to the Seat (17) with two 1/4Ó x 1/2Ó Screws (59). Insert the 1/4Ó x 2Ó Carriage Bolt (61) through the indicated hole in the Rear Seat Frame (16). Tighten a 1/4Ó Nylon Locknut (44) with a 1/4Ó Washer (37) onto the Carriage Bolt. 61 57 41 Attach the other end of the Seat (17) to the Rear Seat Frame (16) with a 1/4Ó Washer (37) and a 1/4Ó x 2Ó Machine Screw (63). 16 44 17 59 37 63 50. Press a 1 1/2Ó Square Inner Cap (57) into the Leg Lever (15). Lubricate the 5/16Ó x 2 1/4Ó Bolt (62). Attach the Leg Lever (15) to the Rear Seat Frame (16) with the Bolt and a 5/16Ó Nylon Locknut (40). Do not overtighten the Nylon Locknut; the Leg Lever must pivot freely. Insert the 5/16Ó x 2Ó Eyebolt (79) into the Leg Lever (15) from the direction shown. Tighten a 5/16Ó Nylon Locknut (40) with a 5/16Ó Washer (20) onto the Eyebolt. 50 40 15 20 40 16 62ÑLubricate 79 57 51. Rest the slot in the Rear Seat Frame (16) on the indicated post in the Lat Upright (1). Attach the Rear Seat 51 Frame to the Lat Upright with a 5/16Ó x 2 3/4Ó Carriage Bolt (77) and the Seat Knob (30). 30 16 1 77 Post Slot 20