Weslo 1000 Uk Manual - Page 16

ATTACHING AND REMOVING THE SEAT Set the bracket on the Seat Frame (36) onto the pin on the Front Upright (42). Attach the Seat Frame to the Front Upright with the M8 x 67mm Carriage Bolt (14) and the Seat Knob (40). For some exercises, the Seat (13) must be removed. First, make sure that the chain is not attached to the leg lever. Next, remove the Seat Knob (40) and the M8 x 67mm Carriage Bolt (14) from the Seat Frame (36). Lift the Seat Frame off the Front Upright (42). ATTACHING THE LEG LEVER TO THE LOW PULLEY STATION To use the Leg Lever (29), the seat must be attached to the front upright (see ATTACHING AND REMOVING THE SEAT above). Attach one end of the Chain (52) to the M10 x 63mm Eyebolt (35) with a Cable Clip (53). Attach the other end of the Chain to the Short Cable (23) with a Cable Clip. Note: Make sure the Eyebolt is positioned vertically on the Leg Lever. 40 42 36 13 14 Pin 52 29 53 23 35 16