Weslo 720 Instruction Manual - Page 4
Before You Begin
View all Weslo 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
BEFORE YOU BEGIN Thank you for selecting the WESLO® CADENCE 720 treadmill. The CADENCE 720 treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when you're not exercising, the unique CADENCE 720 can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this manual carefully before using the treadmill. If you have additional questions, please call our Customer Service Department at 0345-089009. To help us assist you, please note the product model number and serial number before calling. The model number of the treadmill is WETL71500. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location). Before reading further, please review the drawing below and familiarise yourself with the parts that are labelled. Speed Control Accessory Tray Handrails Storage Latch Water Bottle Holder (bottle not included) Console Key/Clip Foot Rails Walking Belt FRONT Circuit Breaker BACK Rear Roller Adjustment Bolt Roller Guards RIGHT SIDE 4 PROBLEM: THE WALKING BELT SLOWS WHEN WALKED ON SOLUTION: a. If an extension cord is needed, use only a 14-gauge cord of 1,5 m or less in length. b. If the walking belt still slows when walked on, please call our Customer Service Department. PROBLEM: THE WALKING BELT IS OFF-CENTRE SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the a allen wrench, turn the rear roller adjustment bolt clock- wise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centred. b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. b Using the allen wrench, turn the rear roller adjustment bolt counterclockwise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few min- utes. Repeat until the walking belt is centred. 13