Weslo Bench 400 Uk Manual - Page 8
the two Short Pad Tubes 30 and the Long Pad Tube
View all Weslo Bench 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
7. Attach the Weight Tube (21) to the Leg Lever (27) with an M8 x 52mm Bolt (6), a 13mm x 7mm Spacer (22), 7 two M8 Washers (23), and an M8 Nylon Locknut (7). Press a 25mm Round Inner Cap (24) into the indicated end of the Weight Tube (21). Press a 25mm Round Angle Cap (25) onto the other end of the Weight Tube. Slide a Weight Stop (26) onto the Weight Tube. Press a 38mm Square Inner Cap (4) into each end of the Leg Lever (27). 4 24 26 7 23 21 4 8. Lubricate the M10 x 63mm Bolt (28) with petroleum jelly or another type of grease. Attach the Leg Lever 8 28 (27) to the bracket on the Leg Lever Tube (18) with the Bolt and the M10 Nylon Locknut (29). Do not overtighten the Nylon Locknut; the Leg Lever 27 must be able to pivot easily. 27 25 22 23 6 18 29 9. Press a 19mm Round Inner Cap (44) into each end of the two Short Pad Tubes (30) and the Long Pad Tube (32). Insert the two Short Pad Tubes (30) into the holes in the Leg Lever (27). Slide two Large Foam Pads (31) onto each Short Pad Tube. 9 31 44 30 31 44 30 44 32 44 18 44 44 Insert the Long Pad Tube (32) into the hole in the Leg Lever Tube (18) as shown. Slide two Large Foam 27 31 Pads (31) onto the Long Pad Tube. 31 10. Press a 25mm Round Inner Cap (24) into each end of 10 a Butterfly Weight Tube (35). Attach the Butterfly Weight Tube (35) to the Left Butterfly Arm (36) with an M8 x 116mm Bolt (34), an M8 Washer (23), a 14.5mm x 72mm Plastic Spacer 23 (33), and an M8 Nylon Locknut (7). Slide a Weight Stop (26) onto the Butterfly Weight Tube (35). 34 36 7 33 35 24 24 26 8