Weslo Cadence 3250 Treadmill English Manual - Page 4
materials.
View all Weslo Cadence 3250 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ASSEMBLY Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. TOOLS REQUIRED FOR ASSEMBLY: An 8" adjustable wrench o and standard screwdriver (not included). 1. Raise the Upright Post (13) to a vertical position. Insert the Lock Knob (14), with the Lock Knob Washer (15), 1 into the Upright Post, and turn the Knob clockwise until almost tight. Leave a little play in the Upright Post for the following steps. 13 ,e,,, ---14 15 2. Slide the upper end of the Left Side Rail (1) into the opening in the left side of the Console (5). Insert a Short Side Rail Bolt (9) through the metal plate under the Console, and tighten the Bolt into the Handrail. Repeat with the Right Side Rail (11). Note: If a Side Rail cannot be inserted into the Console far enough to attach the Bolt, roll back the Foam Grip (2) slightly. 3. Align the hole in the lower end of the Left Side Rail (1) with the hole in the Frame (44). Insert the Long Side Rail Bolt (56) through the Side Rail and Frame. Reach under the Frame and thread the Side Rail Nut (55) onto the end of the Bolt. Repeat the step with the Right Side Rail (not shown). Tighten the Lock Knob (see step 1). 4. Remove the paper backing from the Wrench Clip (48). Press the Wrench Clip onto the Right Roller Bracket (52) in the indicated location. Press the Allen Wrench (49) into the Wrench Clip. 5. Slide the metal Clothes Clip onto the Pulse Earclip in the indicated location. When using the Electronic Monitor, slide the metal clothes clip on the earclip wire onto your collar. 2 1 . 0 2 r . \ 9 5 11 o \ 1 ", 56 44 lia,NN 55 . • 0 48 52 49 5 Pulse Earclip Clothes Clip Make sure that all parts are tightened securely before using 4 the treadmill.