Weslo Cadence 3260 English Manual - Page 9
Trouble, Shooting
View all Weslo Cadence 3260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
CONTROLLING THE SPEED To start the walking belt, first turn the speed control knob to "reset." Then, turn the knob slowly clockwise until the walking belt begins to move at slow speed. CAUTION: After the knob Is turned, there will be a pause before the walking belt begins to move. Adjust the speed slowly until you are familiar with the operation of the treadmill. Carefully step onto the walking belt and begin exercising. Change the speed of the walking belt as desired by turning the speed control knob. To stop the walking belt, turn the knob to "reset." MOTIVATIONAL FITNESS MONITOR The five displays of the motivational fitness monitor provide continuous exercise feedback. The displays can be reset by pressing the ON/CLEAR button. The five displays are described below: TIME-This display shows the elapsed time. Note: When the walking belt is stopped, the TIME display will go into a pause mode after a few seconds. CALORIE-This display shows the total number of nutritional Calories that you have burned. PULSE-This display shows your heart rate. Plug the pulse earclip into the jack on the console, and attach the earclip to your left ear lobe. Slide the clothes clip onto your collar to minimize movement of the earclip wire. After a few seconds, your heart rate will be displayed. If your heart rate is not displayed after a few seconds, rub your ear lobe and reposition the earclip. It may be helpful to stand still while measuring your heart rate. SPEED-This display shows the current speed of the walking belt. DISTANCE-This display shows the total distance that you have walked or run. TURNING THE POWER OFF To turn the power off, remove the safety key from the power switch. The five displays of the motivational fitness monitor will turn off automatically a few minutes after the walking belt is stopped. TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure the power cord is plugged into a properly grounded outlet. (See OPERATION AND ADJUSTMENT in this manual.) If an extension cord is necessary, use only a 14-gauge generalpurpose cord of approximately five feet in length. b. Make sure the safety key is fully inserted into the console. Turn the speed control knob to the "reset" position. (See OPERATION AND ADJUSTMENT.) 9