Weslo Cadence 820 Treadmill English Manual - Page 9
right incline
View all Weslo Cadence 820 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
MOTIVATIONAL FITNESS MONITOR The four displays of the motivational fitness monitor provide continuous exercise feedback. The displays can be reset by pressing the ON/CLEAR button. The four displays are described below: TIME-This display shows the elapsed time. Note: When the walking belt is stopped, the TIME display will go into a pause mode after a few seconds. CALORIE-This display shows the total number of nutritional Calories you have burned. SPEED-This display shows the current speed of the walking belt. DISTANCE-This display shows the total distance you have walked or run. Note: If the walking belt is stopped and remains stationary for about four minutes, the four displays of the motivational fitness monitor will be reset and will darken, although the power will remain on. The four displays will reappear when the ON/CLEAR button is pressed, or the walking belt is restarted. TURNING OFF THE POWER To turn off the power, remove the safety key from the console. The power indicator will darken. Store the safety key in a secure location. INCLINE ADJUSTMENT To vary the intensity of your exercise, the incline of the treadmill can be adjusted in the following manner: 1: UNPLUG THE POWER CORD. Carefully lay the treadmill on its left side. Do not drop the treadmill. Hitch Pin 2. Remove the hitch pin from the right incline leg and adjust the leg to the desired height. Replace the hitch pin and carefully tip the treadmill upright. Right 0 Incline Leg 3. Carefully lay the treadmill on its right side and adjust the left incline leg in the same manner. Make sure that both legs are at the same height. 9