Weslo Cadence 825 Treadmill Owners Manual - Page 9

indicator.will

Page 9 highlights

INCLINE ADJUSTMENT To vary the intensity of your exercise, the incline of the treadmill can be adjusted. Turn the power off and unplug the power cord. Place the treadmill in an open area. 1. Remove the Hitch Pin (39) from the left side of the Incline Leg (40). (See Drawing 1.) 2. Carefully tip the treadmill onto its left side. Remove the Hitch Pin (39) from the right side of the Incline Leg (40). (See Drawing 2.) 2 3. Rotate the Incline Leg (40) to the desired height and reinsert the Hitch Pin (39). Lay the treadmill back down and reinsert the Hitch Pin into the left side of the Incline Leg. Make sure that both Hitch Pins (39) are fully inserted into the same hole on each side of the treadmill Frame (28). 0 39 40 39 28 40 MOTIVATIONAL FITNESS MONITOR The four displays of the motivational fitness monitor provide continuous exercise feedback. The displays can be reset by pressing the ON/CLEAR button. The four displays are described below: TIME-This display shows the elapsed time. Note: When the walking belt is stopped, the TIME display will go into a pause mode after a few seconds. CALORIE-This display shows the approximate number of nutritional Calories you have burned. SPEED-This display shows the current speed of the walking belt. DISTANCE-This display shows the total distance that you have walked or run. Note: If the walking belt is stopped and remains stationary for about four minutes, the four displays of the motivational fitness monitor will be reset and will darken, although the power will remain on. The four displays will appear again when the ON/CLEAR button is pressed, or the walking belt is restarted. TURNING OFF THE POWER To turn off the power, remove the safety key from the console. The power indicator.will darken. Store the safety key in a secure location. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

INCLINE
ADJUSTMENT
To
vary
the
intensity
of
your
exercise,
the
incline
of
the
treadmill
can
be
adjusted.
Turn
the
power
off
and
unplug
the
power
cord.
Place
the
treadmill
in
an
open
area.
1.
Remove
the
Hitch
Pin
(39)
from
the
left
side
of
the
Incline
Leg
(40).
(See
Drawing
1.)
2.
Carefully
tip
the
treadmill
onto
its
left
side.
Remove
the
Hitch
Pin
(39)
from
the
right
side
of
the
Incline
Leg
(40).
(See
Drawing
2.)
3.
Rotate
the
Incline
Leg
(40)
to
the
desired
height
and
reinsert
the
Hitch
Pin
(39).
Lay
the
treadmill
back
down
and
reinsert
the
Hitch
Pin
into
the
left
side
of
the
Incline
Leg.
Make
sure
that
both
Hitch
Pins
(39)
are
fully
inserted
into
the
same
hole
on
each
side
of
the
treadmill
Frame
(28).
0
4
39
0
2
28
39
40
MOTIVATIONAL
FITNESS
MONITOR
The
four
displays
of
the
motivational
fitness
monitor
provide
continuous
exercise
feedback.
The
displays
can
be
reset
by
pressing
the
ON/CLEAR
button.
The
four
displays
are
described
below:
TIME
—This
display
shows
the
elapsed
time.
Note:
When
the
walking
belt
is
stopped,
the
TIME
display
will
go
into
a
pause
mode
after
a
few
seconds.
CALORIE
-This
display
shows
the
approximate
number
of
nutritional
Calories
you
have
burned.
SPEED
-This
display
shows
the
current
speed
of
the
walking
belt.
DISTANCE
-This
display
shows
the
total
distance
that
you
have
walked
or
run.
Note:
If
the
walking
belt
is
stopped
and
remains
stationary
for
about
four
minutes,
the
four
displays
of
the
motiva-
tional
fitness
monitor
will
be
reset
and
will
darken,
although
the
power
will
remain
on.
The
four
displays
will
appear
again
when
the
ON/CLEAR
button
is
pressed,
or
the
walking
belt
is
restarted.
TURNING
OFF
THE
POWER
To
turn
off
the
power,
remove
the
safety
key
from
the
console.
The
power
indicator.will
darken.
Store
the
safety
key
in
a
secure
location.
9