Weslo Cadence Af 5.1 Treadmill English Manual - Page 7
M10 Nuts 73. - treadmill
View all Weslo Cadence Af 5.1 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. With the help of a second person, carefully tip the treadmill onto its side. Unfold the Frame (51) 1 2 away from the Uprights (53, 54). Orient the Base (52) as shown. Attach the Base to the Left Upright (53) and the Right Upright (54) with four M10 x 58mm Bolts (2) and four M10 Nuts (73). Start all four Nuts, and then tighten them. 54 51 With the help of a second person, carefully tip the treadmill so that the Base (52) is flat on the floor. 52 73 2 2 73 53 2. Set the console assembly face down on a soft surface to avoid scratching it. Identify the Right Handrail (33), which has a large hole in the location shown. Hold the Right Handrail near the console assembly. Next, insert the console wire into the large hole in the side of the Right Handrail (33). Using needlenose pliers, carefully grasp the connector and pull the console wire out of the hole near the bracket on the Right Handrail. 2 Console Wire Bracket Console Assembly Connector Large Hole 33 7