Weslo Cadence G25 Treadmill English Manual - Page 6

3. Using two adjustable wrenches, attach the Wheels (15) to the outer sides of the Base (71) with two Wheel Bolts 37 (14) and two Nuts (17) as shown. Do not overtighten 6 the Wheel Nuts; the Wheels should turn freely. It may be helpful to tip the Handrails (6, 7) forward when attaching the Wheels (15). 4. Have a second person raise and hold the front end of the treadmill. Hold a Frame Spacer (13) between the Right 4 Handrail (6) and the Frame (55). Attach the Right Handrail and the Base (71) to the Frame with a Frame Bolt (10), a Handrail Washer (11), and a Star Washer (33). Repeat this step on the left side of the treadmill. 17 15 71 14 6 13 55 33 10 12 11 71 5. Hold the Console Base (1) near the Right Handrail (6). 5 Touch the Right Handrail to discharge any static. Insert the end of the Wire Harness (22) through the three looped plastic ties. Press the end of the Wire Harness into the connector on the back of the Console Base (1) in the location shown. The connectors should slide together easily and snap into place. If the connectors do not slide together easily and snap into place, turn one connector and then try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Connector 1 22 Plastic 6 Ties 6