Weslo Gym 1000 Uk Manual - Page 13
the Front Upright 42. Attach the Seat Frame
View all Weslo Gym 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
23. Press a 38mm Square Inner Cap (32) into the Seat Frame (36). 23 Insert the M6 x 50mm Carriage Bolt (38) into the centre hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two M6 x 16mm Screws (18). Insert the M6 x 50mm Carriage Bolt (38) into the indicated hole in the Seat Frame (36). Tighten an M6 Nylon Locknut (2) with an M6 Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Seat Frame (36) with an M6 Washer (10) and the M6 x 50mm Screw (24). 24. Press a 38mm Square Inner Cap (32) into the 24 Leg Lever (29). Lubricate the M8 x 57mm Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the Bolt and an M8 Nylon Locknut (3). Do not overtighten the Nylon Locknut; the Leg Lever must pivot freely. Insert the M10 x 63mm Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten an M10 Nylon Locknut (21) with an M10 Washer (9) onto the Eyebolt. Note: Make sure the Eyebolt is positioned vertically on the Leg Lever. 25. Rest the Seat Frame (36) on the indicated pin in 25 the Front Upright (42). Attach the Seat Frame to the Front Upright with an M8 x 67mm Carriage Bolt (14) and the Seat Knob (40). 13 38 37 32 18 36 24 10 2 36 Lubricate 33 35 32 3 29 9 21 14 Pin 42 40 36 13