Weslo Lyne 3500 Uk Manual - Page 7

3. With the help of a second person, raise the Uprights 3 (53, 54) so the Base (52) is flat on the floor as shown. Next, position the front of the treadmill Frame (51) be- tween the Uprights. See the inset drawing. Locate the wire inside of the lower end of the Right Upright (54). Secure the wire to the Wire Harness (98). Then, pull the upper end of the wire until the end of the Wire Harness is extending from the indicated hole in the upper end of the Right Upright. Remove the wire from the Wire Harness. Have a second person lift and hold the front end of the Frame (51). Hold a Frame Spacer (111) between the Right Upright (54) and the Frame. Attach the Right Upright and the Frame Spacer to the Frame with a Frame Pivot Bolt (1), a Frame Washer (14), and a Frame Star Washer (9). Repeat this step on the left side of the treadmill. Hole 53 54 111 Large Hole 51 98 14 9 52 1 Wire 98 54 4. Turn the Console Assembly (91) facedown. Be careful 4 not to scratch the face of the Console Assembly. Identify the Right Handrail (55), which has a large hole in one side. Attach the Right Handrail (55) to the Console Assembly (91) with two Console Screws (4), a Crossbar Screw (5), and a Crossbar Star Washer (12). 5 12 4 Large Hole 55 91 7