Western Digital WD1600B008 User Manual (pdf) - Page 25
Frequently Asked Questions-Installation
View all Western Digital WD1600B008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Frequently Asked Questions-Installation WD DUAL-OPTION EXTERNAL USB HARD DRIVE USER MANUAL Q: Why does the drive not power up? A: After connecting the power cord, be sure to press the Power button. The area surrounding the button illuminates blue, and you may hear the drive spin and power up. Q: Why is the drive not recognized under "My Computer" or on the computer desktop. A: If your system has a USB 2.0 PCI adapter card, be sure that its drivers are installed before connecting the WD external USB 2.0 hard drive. The drive is not recognized correctly unless USB 2.0 root hub and host controller drivers are installed. Contact the adapter card manufacturer for installation procedures. Q: How do I partition and reformat the drive? A: FAT32 partitions created by the utilities included in Windows 2000/XP have a maximum partition size of 32 GB. To create partitions larger than 32 GB, you must reformat the drive using NTFS. See "Formatting the Drive" on page 10. Q: Why is the data transfer rate slow? A: Your system may be operating at USB 1.1 speeds due to an incorrect driver installation of the USB 2.0 adapter card or a system that does not support USB 2.0. If your system includes a PCI slot, you can achieve Hi-Speed USB transfer rates by installing a USB 2.0 PCI adapter card. Contact the card manufacturer for installation procedures and more information. Note: If an additional external hard drive is connected to the WD drive, USB bandwidth is shared and may affect performance. Q: I accidentally uninstalled WD Button Manager. How do I reinstall it? A: Go to Start > Run. Type wdbtnmgr in the Open field and click OK to load WD Button Manager. TROUBLESHOOTING - 21