Westinghouse MT80 ARM20 Installation Instructions
Westinghouse MT80 ARM20 Manual
 |
View all Westinghouse MT80 ARM20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Westinghouse MT80 ARM20 manual content summary:
- Westinghouse MT80 ARM20 | Installation Instructions - Page 1
Installation and Assembly: Universal Articulating Wall Mount for 20" - 42" Screens Model: MT80 ARM20 Features: • Universal design for up space by folding flat against the wall • Keeps electronic wires routed internal to reduce clutter Visit the Westinghouse Web Site at www.westinghousedigital.com R - Westinghouse MT80 ARM20 | Installation Instructions - Page 2
basic building construction, and fully understands these instructions. • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Never mount this product to a metal stud wall construction unless the stud can be verified - Westinghouse MT80 ARM20 | Installation Instructions - Page 3
Parts List Description Qty. Part # A wall mount 1 095-0345 B Alligator® anchor 2 590-0097 C .198" ID x .313" OD x .437" H retaining spacer 4 590-5003 D 3/16" allen wrench 1 560-9713 E M4 x .7 x 12 mm phillips screw 4 - Westinghouse MT80 ARM20 | Installation Instructions - Page 4
• Make sure that the wall will safely support the combined load of the equipment and all attached hardware and components. 1 Remove cord covers from wall arm assembly (A) as shown in figure 1.1. Using a stud finder, locate and mark the edges of the wood stud used in mounting this product. Use of - Westinghouse MT80 ARM20 | Installation Instructions - Page 5
and Cinder Block WARNING • When installing Westinghouse wall mounts on cinder block, verify that you have a minimum of 1-3/8" of actual concrete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally - Westinghouse MT80 ARM20 | Installation Instructions - Page 6
919 instruction sheet for installing security screws. 2 To prevent scratching the screen, set a cloth on a flat, level surface that will support the (D). For additional screen compatibility please refer to the Westinghouse Décor wall mount list on out website at www.westinghousedigital.com. VESA - Westinghouse MT80 ARM20 | Installation Instructions - Page 7
three threads of engagement, attach adapter plate to back of screen using four M4 x 20 mm screws (F) as indicated in figure 2.5. FOR VESA 200 x 200 MOUNTING PATTERN: Thread two M6 x 12 mm screws (G), leaving .25" exposed thread, into top holes on back of screen. Hook screen onto adapter plate, and - Westinghouse MT80 ARM20 | Installation Instructions - Page 8
sure cords have enough slack to allow full movement of the arm. 4 Route cords inside arm slots of wall mount (A) as shown in figure 4.1. Optional: Run power cord through one side of mount and signal cable(s) through other side in order to avoid interference with the signal. Lock cords into place by - Westinghouse MT80 ARM20 | Installation Instructions - Page 9
WARNING • Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the screen to fall. 5 If more or less tension is desired in the arm pivot points, do the following: • To increase - Westinghouse MT80 ARM20 | Installation Instructions - Page 10
-users of this Westinghouse display mounting product (the " service or repairs by anyone other than personnel authorized by Westinghouse Digital Electronics, (b) the failure to utilize proper packing when returning the product, (c) improper installation or the failure to follow Product instructions
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Max UL Load Capacity: 80 lb (36.3 kg)
ISSUED: 01-17-06
SHEET #: 202-9094-1
Installation and Assembly:
Universal Articulating Wall Mount for 20" - 42" Screens
Model:
MT80 ARM20
Features:
•
Universal design for 20" - 42" flat panel screens
•
Three tensionable pivot points for extensive adjustment of viewing angle
• VESA
®
100/200/200 x 200 compatible
•
Frees up space by folding flat against the wall
•
Keeps electronic wires routed internal to reduce clutter
±
Visit the Westinghouse Web Site at
www.westinghousedigital.com
For customer care call 1-866-287-5555.