Westinghouse WWTR1502KW Use and Care Guide - Page 6

Door Removal / reversal Instructions To Remove Freezer Handle: (Handles may be easier to reverse while doors are off.) 1. Remove two screws attaching handle to bottom of freezer door. 2. Swing bottom of handle away from the door and slide handle straight up and off of dovetail button. 3. Remove screw and dovetail button and install on other side, using the same holes as nameplate. 4. Self-Adhesive Nameplate Models: Use putty knife to gently peel off nameplate from door and reapply over old handle holes. To attach freezer handle: 1. Start with handle offset away from door. Place top of handle over dovetail button, swing handle into an upright position and pull downward, locking it into place. 2. Secure bottom of handle with two screws removed earlier. Self Adhesive Nameplate (some models) Nameplate To Remove REFRIGERATOR Handle: (Handles may be easier to reverse while doors are off.) 1. Remove two screws attaching handle to top of refrigerator door. 2. Swing top of handle away from door and slide handle down and off of dovetail button. 3. Remove screw and dovetail button and install on other side, moving hole plugs from corresponding holes to opposite side. To attach REFRIGERATOR handle: 1. Start with handle offset away from door. Place bottom of handle over dovetail button, swing handle into an upright position and pull upward, locking it into place. 2. Secure top of handle with screws. Dovetail Button Screw Handle Lock Handle over Dovetail Button Dovetail Button Screw Screw Handle Screw Lock Handle over Dovetail Button 6