Whirlpool EDR1RXV2P Performance Data Sheet - Page 1

Whirlpool EDR1RXV2P Manual

Page 1 highlights

PERFORMANCE DATA SHEET Water Filtration System Model P8WB2L (EDR1RXD1B) Capacity 200 Gallons (757 Liters) Replacement Filter EDR1RXD1, EDR1RXD1B,WHR1RXD1, and KAD1RXD1 System tested and certified by NSF International against NSF/ANSI Standard 42, 53, 401 and CSA B483.1 for the reduction of contaminants specified on the Performance Data Sheet. This system has been tested according to NSF/ANSI Standards 42, 53, 401 and CSA 483.1** for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53, 401 and CSA 483.1** **Certified to CSA B483.1 only for use in Refrigerator applications. Substance Reduction Aesthetic Effects Influent Challenge Concentration Maximum Permissible Product Water Concentration Chlorine Taste/Odor Particulate Class I* 2.0 mg/L ± 10% At least 10,000 particles/mL 50% reduction 85% reduction Contaminant Reduction Influent Challenge Concentration Maximum Permissible Product Water Concentration Lead: @ pH 6.5 / @ pH 8.5 0.15 mg/L ± 10% 0.010 mg/L Benzene 0.015 mg/L ± 10% 0.005 mg/L P-Dichlorobenzene 0.225 mg/L ± 10% 0.075 mg/L Carbofuran 0.08 mg/L ± 10% 0.040 mg/L Toxaphene 0.015 ± 10% 0.003 mg/L Atrazine 0.009 mg/L ± 10% 0.003 mg/L Asbestos 107 to 108 fibers/L†† 99% Live Cysts† 50,000/L min. 99.95% Turbidity 11 NTU ± 10% 0.5 NTU Lindane 0.002 ± 10% 0.0002 mg/L Tetrachloroethylene 0.015 mg/L ± 10% 0.005 mg/L o-Dichlorobenzene 1.8 mg/L ± 10% 0.60 mg/L Ethylbenzene 2.1 mg/L ± 10% 0.70 mg/L 1,2,4-Trichlorobenzene 0.210 mg/L ± 10% 0.07 mg/L 2,4 - D 0.210 mg/L ± 10% 0.07 mg/L Styrene 2.0 mg/L ± 10% 0.1 mg/L Toluene 3.0 mg/L ± 10% 1.0 mg/L Endrin 0.006 mg/L ± 10% 0.002 mg/L Atenolol 200 ± 20% 60 ng/L Trimethoprim 140 ± 20% 20 ng/L Average % Reduction 97.2% 99.9% Average % Reduction 96.0% 99.8% 91.9% 92.4% >99% >99.99% 99.0% >96.6% >99.8% 99.40% >99.8% 93.8% 99.8% 87.9% >96.6% 95.9% >96.9% >96.4% >97.0% >97.4% W11392626C 10-May-2021 11:18:44 EDT | RELEASED In some European factories the letter "W" of the part code mentioned herein will be automatically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

W11392626
C
Water Filtration System
Model P8WB2L (EDR1RXD1B) Capacity 200 Gallons (757 Liters)
Replacement Filter EDR1RXD1, EDR1RXD1B,WHR1RXD1, and KAD1RXD1
System tested and certified by NSF International against NSF/ANSI Standard 42, 53,
401 and CSA B483.1 for the reduction of contaminants specified on the Performance
Data Sheet.
This system has been tested according to NSF/ANSI Standards 42, 53, 401 and CSA 483.1** for the reduction of the substances listed below. The
concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit
for water leaving the system, as specified in NSF/ANSI Standards 42, 53, 401 and CSA 483.1**
**Certified to CSA B483.1 only for use in Refrigerator applications.
Substance Reduction Aesthetic
Effects
Influent Challenge Concentration
Maximum Permissible Product
Water Concentration
Average % Reduction
Chlorine Taste/Odor
Particulate Class I*
2.0 mg/L ± 10%
At least 10,000 particles/mL
50% reduction
85% reduction
97.2%
99.9%
Contaminant Reduction
Influent Challenge Concentration
Maximum Permissible Product
Water Concentration
Average % Reduction
Lead: @ pH 6.5 / @ pH 8.5
0.15 mg/L ± 10%
0.010 mg/L
96.0%
Benzene
0.015 mg/L ± 10%
0.005 mg/L
99.8%
P-Dichlorobenzene
0.225 mg/L ± 10%
0.075 mg/L
91.9%
Carbofuran
0.08 mg/L ± 10%
0.040 mg/L
92.4%
Toxaphene
0.015 ± 10%
0.003 mg/L
>99%
Atrazine
0.009 mg/L ± 10%
0.003 mg/L
>99.99%
Asbestos
10
7
to 10
8
fibers/L††
99%
99.0%
Live Cysts†
50,000/L min.
99.95%
>96.6%
Turbidity
11 NTU ± 10%
0.5 NTU
>99.8%
Lindane
0.002 ± 10%
0.0002 mg/L
99.40%
Tetrachloroethylene
0.015 mg/L ± 10%
0.005 mg/L
>99.8%
o-Dichlorobenzene
1.8 mg/L ± 10%
0.60 mg/L
93.8%
Ethylbenzene
2.1 mg/L ± 10%
0.70 mg/L
99.8%
1,2,4-Trichlorobenzene
0.210 mg/L ± 10%
0.07 mg/L
87.9%
2,4 - D
0.210 mg/L ± 10%
0.07 mg/L
>96.6%
Styrene
2.0 mg/L ± 10%
0.1 mg/L
95.9%
Toluene
3.0 mg/L ± 10%
1.0 mg/L
>96.9%
Endrin
0.006 mg/L ± 10%
0.002 mg/L
>96.4%
Atenolol
200 ± 20%
60 ng/L
>97.0%
Trimethoprim
140 ± 20%
20 ng/L
>97.4%
PERFORMANCE DATA SHEET
10-May-2021 11:18:44 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")