Whirlpool EL88TRRW Dimension Guide - Page 1
Whirlpool EL88TRRW Manual
View all Whirlpool EL88TRRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
All Refrigerator PRODUCT MODEL NUMBERS EL88TRRW Electrical: A 115-volt, 60-Hz, AC-only, 15or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord. NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See "Using the Controls." PRODUCT DIMENSIONS C B not incl. handle 4 A overall Model Size 17.7 cu.ft. Depth - Without Height - Overall Handles Width - Cabinet "A" "B" "C" 665⁄8" (169.2 cm) 281⁄2" (72.4 cm) 30" (76.2 cm) LOCATION REQUIREMENTS This refrigerator may be installed side by side with another refrigerator or freezer. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If you are installing your refrigerator next to a fixed wall, leave extra space on the hinge side to allow for the door to swing open. NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C). Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only. For complete details, see Installation our products, we reserve the right to change materials and specifications without notice. Instructions packed with product. Specifications subject to change without notice. Ref. W10326802A 7/27/12