Whirlpool GD5DHAXVA User Instructions - Page 12

Accessories, Water Filter Certifications

Page 12 highlights

The water dispenser will not operate properly ■ Freezer door closed completely? Close the door firmly. If it does not close completely, see "The doors will not close completely." ■ Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open. ■ Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See "Water Supply Requirements." ■ Kink in the home water source line? Straighten the water source line. ■ New installation? Flush and fill the water system. ■ Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed. ■ Is a reverse osmosis water filtration system connected to your cold water supply? See "Water Supply Requirements" in either the Installation Instructions or the Use and Care Guide. Water is leaking from the dispenser NOTE: One or two drops of water after dispensing is normal. ■ Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever. ■ New installation? Flush the water system. See "Prepare the Water System" or "Water and Ice Dispensers." ■ Recently changed water filter? Flush the water system. See "Prepare the Water System" or "Water and Ice Dispensers." The dispenser water is not cool enough NOTE: Water from the dispenser is chilled to only 50°F (10°C). ■ New installation? Allow 24 hours after installation for the water supply to cool completely. ■ Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely. ■ Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water. ■ Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See "Water Supply Requirements." WATER FILTER CERTIFICATIONS ACCESSORIES To order replacement filters, call 1-800-442-9991 and ask for the part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777. Stainless Steel Cleaner and Polish: Order Part #4396095 Standard Base Filter Cartridge: Order Part #4396841 (T2RFWG2) In Canada, Order Part #4396841B (T2RFWG2) 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

12
The water dispenser will not operate properly
Freezer door closed completely?
Close the door firmly. If it
does not close completely, see “The doors will not close
completely.”
Refrigerator connected to a water supply and the supply
shutoff valve turned on?
Connect refrigerator to water
supply and turn water shutoff valve fully open.
Is the water pressure at least 30 psi (207 kPa)?
The water
pressure to the home determines the flow from the dispenser.
See “Water Supply Requirements.”
Kink in the home water source line?
Straighten the water
source line.
New installation?
Flush and fill the water system.
Water filter installed on the refrigerator?
The filter may be
clogged or incorrectly installed.
Is a reverse osmosis water filtration system connected to
your cold water supply?
See “Water Supply Requirements”
in either the Installation Instructions or the Use and Care
Guide.
Water is leaking from the dispenser
NOTE:
One or two drops of water after dispensing is normal.
Glass not being held under the dispenser long enough?
Hold the glass under the dispenser 2 to 3 seconds after
releasing the dispenser lever.
New installation?
Flush the water system. See “Prepare the
Water System” or “Water and Ice Dispensers.”
Recently changed water filter?
Flush the water system. See
“Prepare the Water System” or “Water and Ice Dispensers.”
The dispenser water is not cool enough
NOTE:
Water from the dispenser is chilled to only 50°F (10°C).
New installation?
Allow 24 hours after installation for the
water supply to cool completely.
Recently dispensed large amount of water?
Allow 24 hours
for water supply to cool completely.
Water not been recently dispensed?
The first glass of water
may not be cool. Discard the first glass of water.
Refrigerator connected to a cold water pipe?
Make sure
the refrigerator is connected to a cold water pipe. See “Water
Supply Requirements.”
ACCESSORIES
To order replacement filters, call
1-800-442-9991
and ask for the
part number listed below or contact your authorized Whirlpool
dealer. In Canada, call
1-800-807-6777
.
Stainless Steel Cleaner and Polish:
Order Part #4396095
Standard Base Filter Cartridge:
Order Part #4396841 (T2RFWG2)
In Canada, Order Part #4396841B (T2RFWG2)
WATER FILTER CERTIFICATIONS