Whirlpool GGE390LXB Installation Instructions
Whirlpool GGE390LXB Manual
 |
View all Whirlpool GGE390LXB manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool GGE390LXB manual content summary:
- Whirlpool GGE390LXB | Installation Instructions - Page 1
RANGE WITH DOUBLE OVENS INSTRUCTIONS D'INSTALLATION POUR CUISINIÈRE ÉLECTRIQUE AUTOPORTANTE AVEC FOURS DOUBLES Table of Contents RANGE SAFETY 1 INSTALLATION REQUIREMENTS 2 Tools and Parts 2 Location Requirements 2 Electrical Requirements - U.S.A. Only 4 Electrical Requirements - Canada - Whirlpool GGE390LXB | Installation Instructions - Page 2
screws to anchor bracket to subfloor. Longer screws are available from your local hardware store. Parts needed If using a power supply cord: ■ A UL listed power supply cord kit marked for use with ranges. The cord should be rated at 250 volts minimum, 40 amps or 50 amps that is marked for use with - Whirlpool GGE390LXB | Installation Instructions - Page 3
the leveling legs. **Model/serial/rating plates may be rotated up from behind the control panel for viewing from the front of the range. ***Excludes handle. Dimension given is from wall to front of oven door and will vary based on electric outlet receptacle installation. K A. 18" (45.7 cm - Whirlpool GGE390LXB | Installation Instructions - Page 4
install your range, you must determine the type of electrical connection you will be using and follow the instructions provided for it here. ■ Range must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate. The model/serial/rating - Whirlpool GGE390LXB | Installation Instructions - Page 5
. Toronto, ON M9W 1R3 CANADA ■ Check with a qualified electrical installer if you are not sure the range is properly grounded. Range Rating* 120/240 Volts 8.8 - 16.5 KW 16.6 - 22.5 KW 120/208 Volts 7.8 - 12.5 KW 12.6 - 18.5 KW Specified Rating of Power Supply Cord Kit and Circuit Protection Amps - Whirlpool GGE390LXB | Installation Instructions - Page 6
INSTALLATION INSTRUCTIONS Unpack Range WARNING Excessive Weight Hazard Use two or more people to move and install range. Failure to do so can result in back or other injury. 1. Remove shipping materials, tape and film from the range. Keep cardboard bottom under range. 2. Remove oven racks and parts - Whirlpool GGE390LXB | Installation Instructions - Page 7
upper oven with the package containing literature. Floor Mounting 2. Determine which mounting method to use: floor or wall. If you have a stone or masonry floor you can use the wall mounting method. 3. Determine and mark edge of range in the cutout space. The mounting bracket can be installed on - Whirlpool GGE390LXB | Installation Instructions - Page 8
Use a new 40 amp power supply cord. Plug into a grounded outlet. Failure to follow these instructions can result in death, fire, or electrical shock. Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Electrically ground range. Failure to follow - Whirlpool GGE390LXB | Installation Instructions - Page 9
cord/conduit plate and insert screws. ■ Assemble a UL listed conduit connector in the opening. 5. Replace back panel and screws on rear of range. 6. Complete installation following instructions for your type of electrical -amp, range power supply cord 3-wire connection: Power supply cord 3-wire - Whirlpool GGE390LXB | Installation Instructions - Page 10
cord replacement, only use a power cord rated at 250 volts minimum, 40 amps or 50 amps that is marked for use with nominal 1³⁄₈" (3.5 cm) diameter connection opening, with ring terminals and marked for use with ranges. 8. Replace terminal block access cover. 3-wire connection: Power Supply Cord - Whirlpool GGE390LXB | Installation Instructions - Page 11
power supply cord replacement, only use a power cord rated at 250 volts minimum, 40 amps or 50 amps that is marked for use with nominal 1³⁄₈" (3.5 cm) diameter connection opening, with ring terminals and marked for use with ranges. 5. Replace terminal block access cover. Direct Wire Installation - Whirlpool GGE390LXB | Installation Instructions - Page 12
hole and conduit plate on bottom of range. Allow enough slack to easily attach the wiring to the terminal block. B A C D E B A. Terminal lug B. Setscrew C. Line 1 (black) wire D. Neutral (white) wire E. Line 2 (red) wire Bare Wire Torque Specifications Attaching terminal lugs to the terminal - Whirlpool GGE390LXB | Installation Instructions - Page 13
Care Guide. 7. Plug power cord into appropriate outlet. Slide range into its final location. Check that the flexible conduit or power supply cord are not bent. 8. Turn power on. Turn on surface elements and oven. See the Use and Care Guide for specific instruction on range operation. If range does - Whirlpool GGE390LXB | Installation Instructions - Page 14
bracket is installed, use a flashlight and look underneath the bottom of the range: ■ Look for the anti-tip bracket securely attached to floor or wall. ■ Slide range back so rear range foot is under anti-tip bracket. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and - Whirlpool GGE390LXB | Installation Instructions - Page 15
Notes 15 - Whirlpool GGE390LXB | Installation Instructions - Page 16
très importante. Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de toujours lire tous les ce qui peut se produire en cas de non-respect des instructions. AVERTISSEMENT Risque de basculement Un enfant ou une personne adulte peut - Whirlpool GGE390LXB | Installation Instructions - Page 17
avant d'entreprendre l'installation. Lire et suivre les instructions fournies avec chacun l'utilisation avec une cuisinière. Pour service 250 volts minimum, 40 A ou installation d'une hotte de cuisine dépassant le bas des placards d'au moins 5" (12,7 cm) horizontalement. ■ Respecter les dimensions - Whirlpool GGE390LXB | Installation Instructions - Page 18
cm). Hauteur du plan de travail 36" (91,4 cm) IMPORTANT : En cas d'installation d'une hotte ou d'un ensemble hotte/micro-ondes au-dessus de la cuisinière, suivre les instructions fournies avec la hotte concernant les dimensions de dégagement à respecter au-dessus de la surface de la table de cuisson - Whirlpool GGE390LXB | Installation Instructions - Page 19
120/208 volts A Electrical Shock Hazard Electrically ground range. Failure to do so can result in death, fire, or electrical shock. Si l' des codes ci-dessus, contacter : Canadian Standards Association 178 Rexdale Blvd. Toronto, ON M9W 1R3 CANADA. 8,8 à 16,5 kW 7,8 à 12,5 kW 40 ou 50** 16,6 à 22,5 - Whirlpool GGE390LXB | Installation Instructions - Page 20
deux ou plus de personnes pour déplacer et installer la cuisinière. Le non-respect de cette instruction peut causer une blessure au dos ou d'autre plancher dans le sens de la longueur derrière la cuisinière en guise de support lorsque la cuisinière est placée sur sa partie postérieure. 4. À l'aide - Whirlpool GGE390LXB | Installation Instructions - Page 21
briquetage, on peut utiliser la méthode de montage au mur. 3. Déterminer et marquer l'emplacement du bord de la cuisinière dans l'espace à découper. On peut installer la bride de montage du côté gauche ou droit du découpage. Positionner la bride de montage dans la zone découpée de façon à ce que le - Whirlpool GGE390LXB | Installation Instructions - Page 22
cuisson au four soient satisfaisants. Achever l'installation 1. Vérifier que toutes les pièces sont maintenant installées. S'il reste une pièce, surface et le four. Pour des instructions spécifiques concernant l'utilisation de la cuisinière, consulter le Guide d'utilisation et d'entretien. Si la - Whirlpool GGE390LXB | Installation Instructions - Page 23
alimentation électrique. 5. Pour s'assurer que la bride antibasculement est installée, utiliser une lampe de poche pour examiner le dessous de la antibasculement si la cuisinière est déplacée. Le non-respect de ces instructions peut causer un décès ou des brûlures graves aux enfants et aux adultes. - Whirlpool GGE390LXB | Installation Instructions - Page 24
W10289536A © 2010. All rights reserved. Tous droits réservés. 1/10 Printed in U.S.A. Imprimé aux É.-U.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
INSTALLATION INSTRUCTIONS
FREESTANDING ELECTRIC RANGE WITH DOUBLE OVENS
INSTRUCTIONS D'INSTALLATION POUR CUISINIÈRE
ÉLECTRIQUE AUTOPORTANTE AVEC FOURS DOUBLES
RANGE SAFETY
Table of Contents
Table des matières
RANGE SAFETY
.........................................................................
1
INSTALLATION REQUIREMENTS
............................................
2
Tools and Parts
........................................................................
2
Location Requirements
............................................................
2
Electrical Requirements - U.S.A. Only
.....................................
4
Electrical Requirements - Canada Only
..................................
5
INSTALLATION INSTRUCTIONS
..............................................
6
Unpack Range
.........................................................................
6
Adjust Leveling Legs
................................................................
6
Install Anti-Tip Bracket
.............................................................
7
Electrical Connection - U.S.A. Only
.........................................
8
Verify Anti-Tip Bracket Location
............................................
13
Level Range
...........................................................................
13
Complete Installation
.............................................................
13
Moving the Range
..................................................................
14
SÉCURITÉ DE LA CUISINIÈRE
..............................................
16
EXIGENCES D’INSTALLATION
..............................................
17
Outils et pièces
.....................................................................
17
Exigences d’emplacement
...................................................
17
Spécifications électriques – Canada seulement
..................
19
INSTRUCTIONS D'INSTALLATION
.......................................
20
Déballage de la cuisinière
.....................................................
20
Réglage des pieds de nivellement
........................................
20
Installation de la bride antibasculement
...............................
21
Vérification de l'emplacement de la
bride antibasculement
..........................................................
22
Réglage de l'aplomb de la cuisinière
....................................
22
Achever l’installation
.............................................................
22
Déplacement de la cuisinière
................................................
23
W10289536A
IMPORTANT:
Save for local electrical inspector's use.
IMPORTANT :
À conserver pour consultation par l'inspecteur local des installations électriques.
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING