Whirlpool MED6600TQ Use and Care Guide - Page 19
Reverse the strike, Reinstall the door
View all Whirlpool MED6600TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
5. Remove the 4 plastic plugs located outside the dryer door opening. Reinstall the door 1. Remove the 4 screws and 2 hinges from the dryer door. 2. Replace the 4 screws in the same holes. 6. Install 4 plastic plugs into screw holes in the dryer left where the hinges were removed in Step 4. Reverse the strike 1. Remove the door strike from the dryer door opening. 2. Remove the cosmetic screw opposite the door strike. 3. Remove the 4 screws from the opposite side of the door. A B A. Door strike B. Cosmetic screw 3. Reinstall the door strike and cosmetic screw on the opposite side of the dryer door opening from where they were removed. NOTE: Door strike and plugs must be on the same side of the dryer door opening. 4. Install the 2 hinges to the front panel of the dryer using 4 screws. Use the non-slotted side to attach the hinge to the front panel. 19