Whirlpool MH1170XS Installation Instructions - Page 5
Whirlpool MH1170XS Manual
View all Whirlpool MH1170XS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
5. Rotate blower motor 180° so that exhaust ports face the back of microwave oven, and lower it back into the microwave oven. 1. 2. 3. 4. 5. Roof Venting Installation Only Repeat Step 1 from "Wall Venting Installation Only." Repeat Step 2 from "Wall Venting Installation Only." Repeat Step 3 from "Wall Venting Installation Only." Repeat Step 4 from "Wall Venting Installation Only." Rotate blower motor so that exhaust ports face the top of microwave oven, and flat sides of blower motor face back of microwave oven. Lower blower motor back into microwave oven. A A A. Exhaust port 6. Reattach blower motor to back of microwave oven with 2 screws removed in Step 3. 7. Reattach damper plate. Make sure damper plate tabs are inserted into the slots in the top of the microwave oven. A D B A. Exhaust port C A. Screws B. Damper plate C. Slots D. Damper plate tabs IMPORTANT: If blower motor is not positioned with flat sides facing the back of the microwave oven (as shown), performance will be poor. 6. Reattach blower motor to back of microwave oven with 2 screws removed in Step 3 of "Wall Venting Installation Only." Securely tighten screws. NOTE: If blower motor is not correctly oriented, the 2 screws removed in Step 3 cannot be reattached to the microwave oven. 7. Reattach damper plate. Make sure damper plate tabs are inserted into the slots in the top of the microwave oven. A D B 8. Secure damper plate with 2 screws removed in Step 1. C A. Screws B. Damper plate C. Slots D. Damper plate tabs 8. Secure damper plate with 2 screws removed in Step 1 of "Wall Venting Installation Only." 5