Whirlpool MH2175XSS Use and Care Guide - Page 6

Microwave Oven Control - 0 manual

Get Whirlpool MH2175XSS PDF manuals and user guides View all Whirlpool MH2175XSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

MICROWAVE OVEN CONTROL Display When power is first supplied to the microwave oven, a ":" will blink in the display. Touch CANCEL OFF to stop the blinking. If the ":" blinks in the display at any other time, a power failure has occurred. Touch CANCEL OFF and reset the clock if needed. If an invalid value has been entered, the invalid entry tones will sound, and the input prompt will reappear in the display. Retry your entry. When the microwave oven is in use, the display shows cooking power, quantities, weights and/or prompts. When the microwave oven is not in use (standby mode), the display shows the time of day or Timer countdown. The speed of the scrolling text may be adjusted, if necessary. To Adjust Scroll Speed: 1. Touch and hold CLOCK for 3 seconds until 2 tones sound. 2. Touch number pad "1" for SLOW, "2" for NORMAL or "3" for FAST. 3. Touch START to complete the adjustment. Start The START pad begins any function. If not touched within 5 seconds after touching a pad, "PRESS START" will scroll in the display as a reminder. If not touched within 2 minutes after touching a pad, the display will return to the time of day mode and the programmed function will be canceled. If cooking is interrupted by opening the door, touching START will resume the preset cycle. Cancel Off The CANCEL OFF pad stops most functions except for the Control Lock and Demo Mode. The microwave oven will also turn off when the door is opened. Close the door and touch START to resume the cycle. Add 30 Seconds The ADD 30 SEC control automatically starts the microwave oven at 100% power for 30 seconds, and adds 30 seconds of cook time, up to 10 minutes, with each additional touch of the control. Touching ADD 30 SEC during a manual cook cycle will add 30 seconds of cook time at the current cook power. Clock This is a standard 12-hour clock (12:00-11:59) and does not show a.m. or p.m. To Set: The microwave oven and timer must be off. 1. Touch CLOCK. 2. Touch the number pads to set the time of day. 3. Touch CLOCK or START. To Remove: 1. Touch CLOCK. 2. Touch 0. 3. Touch CLOCK. The time will disappear, and ":" will appear on the display. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
6
MICROWAVE OVEN CONTROL
Display
When power is first supplied to the microwave oven, a “:” will
blink in the display. Touch CANCEL OFF to stop the blinking.
If the “:” blinks in the display at any other time, a power failure
has occurred. Touch CANCEL OFF and reset the clock if needed.
If an invalid value has been entered, the invalid entry tones will
sound, and the input prompt will reappear in the display. Retry
your entry.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use (standby mode), the display shows the time of
day or Timer countdown.
The speed of the scrolling text may be adjusted, if necessary.
To Adjust Scroll Speed:
1.
Touch and hold CLOCK for 3 seconds until 2 tones sound.
2.
Touch number pad “1” for SLOW, “2” for NORMAL or “3” for
FAST.
3.
Touch START to complete the adjustment.
Start
The START pad begins any function. If not touched within
5 seconds after touching a pad, “PRESS START” will scroll in the
display as a reminder. If not touched within 2 minutes after
touching a pad, the display will return to the time of day mode
and the programmed function will be canceled.
If cooking is interrupted by opening the door, touching START will
resume the preset cycle.
Cancel Off
The CANCEL OFF pad stops most functions except for the
Control Lock and Demo Mode.
The microwave oven will also turn off when the door is opened.
Close the door and touch START to resume the cycle.
Add 30 Seconds
The ADD 30 SEC control automatically starts the microwave oven
at 100% power for 30 seconds, and adds 30 seconds of cook
time, up to 10 minutes, with each additional touch of the control.
Touching ADD 30 SEC during a manual cook cycle will add
30 seconds of cook time at the current cook power.
Clock
This is a standard 12-hour clock (12:00-11:59) and does not
show a.m. or p.m.
To Set:
The microwave oven and timer must be off.
1.
Touch CLOCK.
2.
Touch the number pads to set the time of day.
3.
Touch CLOCK or START.
To Remove:
1.
Touch CLOCK.
2.
Touch 0.
3.
Touch CLOCK.
The time will disappear, and “:” will appear on the display.