Whirlpool RBD245PDB Use and Care Manual - Page 41

the oven light(s), To replace, an oven, light

Page 41 highlights

The oven light(s) The oven light(s) will come on when you open the oven door. To turn the light(s) on when the oven door is closed, press the Oven Light Pad @on the control panel. Models with rear lights: 1. Disconnect appliance at the main power supply. Electrical Shock Hazard l Make sure oven and light bulb are cool and power to the oven has been turned off before replacing the light bulb. .The light cover must be in place when using the oven. The cover protects the bulb from breaking, and from high oven temperatures. Because the light cover is made of glass, be careful not to drop it. Failure to follow the above could result in electrical shock, burns, or injury from broken glass. To replace an oven light: Models with side lights: 1. Disconnect appliance at the main power supply. 2. Remove the glass bulb cover in the back of the oven by screwing it out counterclockwise. 3. Remove the light bulb from its socket. Replace the bulb with a similar 125volt, 15watt appliance bulb. 2. Remove glass light cover by grasping rear or back edge of cover and pulling it away from the side wall of the oven. 3. Remove the light bulb from its socket. Replace the bulb with another halogen bulb (12 volt, 5 watt maximum, available at most hardware stores). 4. Replace the light cover by snapping it back into wall. Reconnect appliance at main power supply. 4. Replace the bulb cover by screwing it in clockwise. Reconnect appliance at the main power supply. NOTE: The oven light(s) will not work during the Self-Cleaning cycle. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

The oven
light(s)
The oven light(s) will come on when you
open the oven door. To turn the light(s) on
when the oven door is closed, press the
Oven Light Pad @on
the control panel.
Electrical
Shock
Hazard
l
Make sure oven and light bulb are
cool and power to the oven has been
turned off before replacing the light
bulb.
.The
light cover must be in place when
using the oven. The cover protects
the bulb from breaking, and from high
oven temperatures.
Because the light
cover is made of glass, be careful not
to drop it.
Failure to follow the above could result
in electrical
shock, burns, or injury from
broken glass.
To replace
an oven
light:
Models
with side lights:
1. Disconnect
appliance
at the main power
supply.
2. Remove
glass light cover by grasping
rear or back edge of cover and pulling it
away from the side wall of the oven.
3. Remove
the light bulb from its socket.
Replace
the bulb with another halogen
bulb (12 volt, 5 watt maximum,
available
at most hardware
stores).
4. Replace
the light cover by snapping
it
back into wall. Reconnect
appliance
at
main power supply.
Models
with rear lights:
1. Disconnect
appliance
at the main power
supply.
2. Remove the glass bulb cover in the back
of the oven by screwing
it out counter-
clockwise.
3. Remove the light bulb from its socket.
Replace
the bulb with a similar 125volt,
15watt
appliance
bulb.
4. Replace the bulb cover by screwing
it in
clockwise.
Reconnect
appliance
at the
main power supply.
NOTE: The oven light(s) will not work during
the Self-Cleaning
cycle.
41