Whirlpool SF362LXTT Dimensions - Page 1
Whirlpool SF362LXTT - 30"GAS S/C ACCUBAKE CUST BROIL Manual
UPC - 883049054957
View all Whirlpool SF362LXTT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
® 30" Freestanding Gas Range PRODUCT MODEL NUMBERS GS773LXS SF262LXS SF265LXT SF272LXT SF362LXS SF362LXT SF462LXS OVERALL DIMENSIONS Gas supply: Use 3/4" (1.9 cm) rigid pipe gas supply line to the range location. A smaller size pipe on long runs may result in insufficient gas supply. With L.P. gas, piping or tubing size can be 1/2" minimum. If local codes permit, a new CSA design-certified, 4 - 5 ft (122 - 152.4 cm) long, 1/2" (1.3 cm) or 3/4" (1.9 cm) I.D., flexible metal appliance connector may be used for connecting range to the gas supply line. A 1/2" (1.3 cm) male pipe thread is needed for connection to pressure regulator female pipe threads. An easily accessible individual manual shutoff valve must be located in the same room, but external to the range. Electrical: 120-volt, 60 Hz, AC-only, 15 amp, fused electrical circuit is required. A separate circuit is recommended. A time-delay fuse or circuit breaker is recommended. CABINET OPENING DIMENSIONS A BC E D A. 27¹⁄₈" (68.9 cm) depth with handle B. 36" (91.4 cm) cooktop height C. 46⁷⁄₈" (119.1 cm) overall height D. 29⁷⁄₈" (75.9 cm) width E. 25" (63.5 cm) D B C A E K G I G H J F I A. 18" (45.7 cm) upper side cabinet to countertop B. 13" (33 cm) max. upper cabinet depth C. 30" (76.2 cm) min. opening width D. For minimum clearance to top of cooktop, see NOTE* E. 30¹⁄₈" (76.5 cm) min. opening width F. This shaded area recommended for installation of rigid gas pipe G. 8" (20.3 cm) H. 17" (43.2 cm) I. 4¹⁄₂" (11.4 cm) J. 2" (5.1 cm) K. 2" (5.0 cm) min. clearance from both sides of range to side wall or other combustible material. *NOTE: 24" (61 cm) minimum when bottom of wood or metal cabinet is protected by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper. 30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet. Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only. For complete details, see Installation our products, we reserve the right to change materials and specifications without notice. Instructions packed with product. Specifications subject to change without notice. Ref. 9762998 06-19-07