Whirlpool UDT518SAFP Installation Guide - Page 15

Complete installation 1. Place the lower panel behind the toekick panel. 2. Place 2-piece toekick against the legs of the dishwasher. 3. Place the inner toekick piece (with slots) against the toekick bracket. The slots should align with toekick bracket screw holes. Allow the bottom edge of the lower toekick to touch the floor. 4. Place larger toekick over the inner piece and install 4 toekick screws. Use additional 2 screws for installations over 33-1/2" (85.09 cm) high. Use both toekick pieces for all installation heights. 5. Reconnect power or plug in dishwasher. Power supply cord method: WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Use top 4 screw holes Adjust up or down 2-piece toekick Direct wire method: WARNING Installation of custom panel Hop hook Electrical Shock Hazard Electrically ground dishwasher. Connect ground wire to green ground connector in terminal box. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Weight < 2.5 kg St4 countersunk head screw Lower hook 15