Whirlpool UXT2030AYB Installation Guide - Page 10
Range Hood Use
View all Whirlpool UXT2030AYB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Complete Installation 1. Install the 75W (max.) Incandescent light bulb. See "Replacing the Incandescent Light Bulb" in the "Range Hood Care" section. 2. Replace grease filter if removed. See the "Range Hood Care" section. 3. Check the operation of the range hood fan and light. See "Range Hood Use" section. If range hood does not operate, check to see whether a circuit breaker has tripped or a household fuse has blown. Disconnect power and check wiring connections. NOTE: To get the most efficient use from your new range hood, read the "Range Hood Use" section. RANGE HOOD USE The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen. The hood controls are located on the top of the range hood. A Range Hood Controls Off On Off Low High B C A. Incandescent light housing and cover B. Filter retainer C. Grease filter A B A. On/Off light switch B. Fan speed switch Operating the light Push the light switch to the right to turn the light Off. Push the light switch to the left to the turn the light On. Operating the fan Push the fan switch to the left for Low speed. Push the fan switch to the right for High speed. Push the fan switch to the middle for Off. 10