Whirlpool WED5500XW Owners Manual - Page 8

4. Select the desired cycle 6. Select cycle options (if desired) Select the desired cycle for your load. See the Cycle Guide or the display for more information about each cycle. 5. Set cycle settings Add additional options by pressing the button. NOTE: Not all options and settings are available with all cycles. 7. Press START/PAUSE to begin cycle Press the START/PAUSE button to begin the cycle. 8. Remove garments promptly after cycle is finished The default cycle settings will be shown. For some cycles, you may select alternate settings by pressing the button for that setting. Time adjusts for Manual Cycles only. NOTE: Not all options and settings are available with all cycles. Temp Press the TEMP button to change the drying temperature from the default setting. Wrinkle Shield™ feature n Get up to 60 or 150 minutes for models with two choices, 90 minutes for models with only one choice of heat-free, periodic tumbling at the end of a cycle. Press the WRINKLE SHIELD™ button to turn ON or OFF at any time before the cycle has ended. n The WRINKLE SHIELD™ feature is preset to "OFF." If selected for other cycles, the WRINKLE SHIELD™ feature setting will remain "ON" the next time that cycle is selected. Promptly remove garments after cycle has completed to reduce wrinkling. If you are unable to remove the load promptly, press the Wrinkle Shield button to turn ON or OFF at any time before the cycle has ended. 8