Whirlpool WED86HEBC Installation Guide - Page 20
Reinstall hinge and latch on, opposite sides, Remove hinge and latch, Rotate and reassemble outer
View all Whirlpool WED86HEBC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
6. Rotate and reassemble outer window assembly to trim ring Bottom of door 7. Remove hinge and latch Latch Notches Fig. A Hinge Using a TORX® T25 screwdriver, remove the 3 TORX screws securing the latch plate and latch backing plate and the 5 screws holding the hinge assembly in place. 8. Reinstall hinge and latch on opposite sides Fig. B With the edge with 2 notches at the top, align the notches on the outer window assembly with the tabs on the trim ring and lower into place as shown in figure A. Rotate the outer window assembly counterclockwise to lock tabs into place (figure B). Using a Phillips screwdriver, secure with 2 screws removed earlier. IMPORTANT: Do not overtighten. Using a TORX T25 screwdriver, reinstall the latch plate, latch backing plate, and hinge assembly on the opposite sides from which they were removed. 20