Whirlpool WFE515S0JS Installation Instructions - Page 9
wire connection: Power Supply Cord
View all Whirlpool WFE515S0JS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Style 2: Direct wire strain relief ■■ Remove the knockout as needed for the flexible conduit connection. ■■ Assemble a UL listed conduit connector in the opening. A 4-wire connection: Power Supply Cord Use this method for: ■■ New branch-circuit installations (1996 NEC) ■■ Mobile homes ■■ Recreational vehicles ■■ In an area where local codes prohibit grounding through the neutral 1. Part of metal ground strap must be cut out and removed. B A. Removable retaining nut B. Conduit ■■ Tighten strain relief screw against the flexible conduit. 5. Complete installation following instructions for your type of electrical connection: 4-wire (recommended) 3-wire (if 4-wire is not available) Electrical Connection Options If your home has: And you will be connecting to: Go to Section: 4-wire receptacle (NEMA type 14-50R) A UL Listed, 250 V 4-wire minimum, 40 A, connection: range power supply Power supply cord cord 4-wire direct 3/8" (1.0 cm) A circuit breaker box or fused disconnect 4-wire connection: Direct wire 5" (12.7 cm) 3-wire receptacle (NEMA type 10-50R) A UL Listed, 250 V 3-wire minimum, 40 A, connection: range power supply Power supply cord cord A B C A. Metal ground strap B. Discard C. Ground-link screw 2. Use a Phillips screwdriver to remove the ground-link screw from the back of the range. Save the ground-link screw and the end of the ground link under the screw. 3. Feed the power supply cord through the strain relief on the cord/conduit plate on bottom of range. Allow enough slack to easily attach the wiring to the terminal block. A B C D A. Terminal block B. Ground-link screw C. UL listed strain relief D. Power supply cord wirest 3-wire direct 3/8" (1.0 cm) 3" (7.6 cm) A circuit breaker box or fused disconnect 3-wire connection: Direct wire 9