Whirlpool WFW80HEBW Use & Care Guide - Page 10
Select CYCLE, Adjust settings, if desired, Select any additional options, Setting a delayed wash
View all Whirlpool WFW80HEBW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
USING YOUR WASHER 8. Select CYCLE* 10. Select any additional options* Appearance may vary. Turn cycle knob to select your wash cycle. See "Cycle Guide" for details on cycle features. 9. Adjust settings, if desired* Appearance may vary. To add an option to the cycle, touch its name - Extra Rinse, TumbleFresh, or Cycle Signal. To remove an option from the selected cycle, touch the option again. 11. Setting a delayed wash Appearance may vary. The display will show the default settings for the selected cycle. To adjust a setting, touch its name - Wash Temp, Spin, Soil, or Extra Rinse. Adjusting settings will change the Estimated Time Remaining. Tightly packing the load, unbalanced loads, or excessive suds may also cause the washer to increase the cycle time. Appearance may vary. If you do not want to begin a cycle immediately, you may choose the DELAY WASH option. This will delay the start of the wash cycle by up to 12 hours. To set a delayed wash: 1. Touch DELAY WASH + and - buttons to set the desired delay time. 2. Touch and hold START to set the delay. The delay countdown has started when the START light stops blinking. *Not all options and settings are available with all cycles. See "Cycle Guide" for available options and settings. 10